Thảo luận Q5 - Q10 pro

eolohd

Active Member
Đây bác ơi: Lưu ý chữ vàng đậm là tính năng mới trên HDMI 2.0
Untitled01f76.png

có bác nào biết vụ này không :

"there NOT any device support YCbCr444 10 bit at 60hz , HDMI 2.0 support max YCbCr444 10 bit at 30hz.

try YCbCr422 10 bit at 60hzy."

HDMI 2.0 chỉ ra tối đa 444 10bit 30hz thôi á ?
 

tbn2004

Active Member
Tình cờ dzo đây có cái review/test Q10 Pro hơi bị kinh

http://forum.kodi.tv/showthread.php?tid=265888

Review last updated October 8, 2016
A/V Tests:
  • [Audio] Dolby Digital 5.1 (640Kbps) = pass
  • [Audio] DD Plus 5.1 = pass
  • [Audio] DD Plus 7.1 = pass
  • [Audio] TrueHD 5.1 = pass
  • [Audio] TrueHD 7.1 = pass
  • [Audio] ATMOS = pass
  • [Audio] DTS (1.5Mbps) = pass
  • [Audio] DTS HRA 5.1 = pass
  • [Audio] DTS HRA 7.1 = pass
  • [Audio] DTS-HD MA 5.1 = pass
  • [Audio] DTS-HD MA 7.1 = pass
  • [Audio] DTS:X = pass
  • [Audio] AAC 5.1 = pass
  • [Audio] FLAC 5.1 = pass
  • [Audio] LPCM 5.1 = pass
  • [Audio] LPCM 7.1 = pass
  • [Audio] 96kHz, 192kHz and 96kHz/24-bit = all three pass (However, no 24-bit as capped at 16-bit render; read here)
  • Anime 10-bit 1080p HEVC = pass
    [*] Anime Hi10P 1080p H264 = plays, but w/some macroblocking and pixellation in certain parts of the picture
    [*] 29.970 MPEG2 (VOB from a DVD rip) = pass, playback at proper framerate
    [*] 29.970 MPEG2 1080i 4:2:0 = pass, playback at proper framerate
    [*] 29.970 MPEG2 1080i 4:2:2 = audio okay, but picture (most media players, including nVidia Shield, can't handle this video type; Intel i3 and up can)
    [*] 59.940 MPEG2 720p = pass, playback at proper framerate
    [*] 23.976 1080p H.264 = pass, playback at proper '23.97' framerate (as my projector indicates). @pcristi's diagnostic tool indicates 47.94 (double value of 23.976), which seems okay as there are no microstutters. More here
    [*] 24.000 1080p H.264 = pass, playback at proper framerate
    [*] 29.970/60.000 1080p H.264 = pass, playback at proper framerate
    [*] 25.000/50.000 1080p H.264 = pass, playback at proper framerate
    [*] 23.976 1080p VC-1 = pass, playback at proper framerate
    [*] 29.970 1080i VC-1 = pass, but could be a bit smoother (the pre-production unit fared worse w/this)
    [*][3D MVC] 23.976 3D ISO = partial fail, playback in proper 3D mode, but at '24.00' framerate (microstutters, frame skips, jumps are noticeable; this remains the biggest issue left for HiMedia to address)
    [*][3D MVC] 23.976 3D MVC = plays in 2D mode (have requested HiMedia to add support for this as container shouldn't matter; should leverage MVC decoder same as ISO)
    [*][4K HEVC Video] 23.976 = Smooth playback
    [*][4K HEVC Video] 24 = Smooth playback
    [*][4K HEVC Video] 24fps HDR 10bit = pass (looks gorgeous even on my 8-bit 4K display)
    [*][4K HEVC Video] 25 = Smooth playback
    [*][4K HEVC Video] 29.970 = Smooth playback
    [*][4K HEVC Video] 50 = Smooth playback
    [*][4K HEVC Video] 50fps 10bit = Smooth playback, no issues here (especially as playback issues on some 4K players, like pre revision-C AMLogic S905 h/w)
    [*][4K HEVC Video] 59.940 = Smooth playback
    [*][4K VP9 Video] Variable framerate clips = Smooth playback
    [*][5K Video] 5120x2700 29.970 = No picture, audio okay (just tried out of curiosity; Shield TV can't handle it either)
    [*][8K Video] 7680x4320 29.970 = No picture, audio okay (just tried out of curiosity; Shield TV can't handle it either)
    [*][Forced Subtitles] Support has been added. Tested in MKV only
    [*][3D Subtitles] Supported in 3D mode
    [*][Bitrates] Birds clips up to 90Mbps = plays perfectly without breaking any sweat
    [*][Bitrates] Jellyfish clips up to 300Mbps = no sweat, perfect playback, whether H.264 or HEVC
    (This is a huge improvement over previous-gen Q5/Q10 4K3D. Makes Q5/Q10 Pro more than capable for any high bitrate videos as no existing or upcoming 4K's are expected to exceed 128Mbps)
 

longmax

Member
Mấy bác xài q10pro cho em hỏi làm sao mình pas âm thanh DTS từ q10pro xuống amp ah em xài kodi nó chỉ ra 2.0 thôi hà chỉnh hoài ko ra đc DTS...
 

tbn2004

Active Member
Trong phần setting Level, đổi sang Expert, rồi bạn mới set up pass through được.
Tham khảo youtube link này đi bạn:
 
Mình vào update trên usb thì hiện lỗi error rồi out ra lun .,ko biết bị j nữa ?Resote lại cũng ko đc lun .!

image_zps7m6n5fdt.jpeg

image_zpsjzrnrsjy.jpeg
 
Chỉnh sửa lần cuối:

meocon

Well-Known Member
rùi theo đem bảo hành a ơi , up theo kiểu restore mà ko dc thì ko giải quyết tại nhà dc dâu
 

jackpham

Well-Known Member
futeko.com
Update from HiMedia as of today.

Next firmware will be an update to Android 5.1.1 firmware, and will be next week (week starting 17-OCT).

Android 7 firmware will follow. The reason for delayed Android 7 firmware is that they want it to be stable. Which does seem the correct way to approach things.

Sorry for the delay.

Tin buồn cho ae Q10 Pro! Đợi chờ là hạnh phúc. tiếp tục hóng thôi
 
Bên trên