jackpham
Well-Known Member
Chưa có link bạn ơi. Chắc còn nhiều lỗi nên chưa Public cho anh em trải nghiệm.
Thảo luận Q5 - Q10 pro
- Bắt đầu LUC QUYET CHIEN
- Ngày bắt đầu
Chưa có link bạn ơi. Chắc còn nhiều lỗi nên chưa Public cho anh em trải nghiệm.
hơn có 8gb làm đc gì bác chủ yếu gắn thẻ micro thôi nhà còn 2 cái 64gb nên ko quan tâm tới bộ nhớ rom lắmLấy luôn Q10 pro đi a , dc bộ nhớ 16GB , xài cho nhiều
cái hơn 8gb đó mà ối thanh niên trong này nuối tiếc vì ko lấy con 10pro đấy bạn hiền....
tiện cho mình hỏi, bàn phím logitech k400 có tương thích với q10 pro ko các bác, sợ mua về mà ko xài dc thì tiếc. tính mua xài cho dễ chứ remote nó chán quá rồi.
Lucky76
Well-Known Member
Mình có xài con Logitech k400r thấy xài cho Q10Pro cũng được mà ko tiện bằng chuột bay, nhất là cái touchpad của nó. K400 thì xài cho miniHTPC thì ngon.
Lucky76
Well-Known Member
Tùy theo nhu cầu thôi, cài game nhiều thì mua Q10Pro, ko game chỉ cần Q5Pro hay Q10Pro lite cũng ok.
meocon
Well-Known Member
Lúc trước cũng có xài , sau này bỏ , cầm to ko tiện , chuột bay nhỏ vừa bàn tay , cái kia phải cầm 2 tay
lehuytrinh
Well-Known Member
Có Bác nào biết cách xử lý cho ứng dụng Asia chạy trên q10pro không ạ . Em cài xong chạy nó toàn báo lỗi không có kết nối internet , gỡ ra cài lại vẫn vậy .
Transit266
Active Member
Có bác nào đã xài tay cầm Xiaomi trên Q10 pro chưa nhỉ, game asphalt 8 có hỗ trợ tay cầm xiaomi không các bác? (hỗ trợ trực tiếp không cần giả lập) thanks các bác
vanninhthuan119
Well-Known Member
Hỏi thật, cái vụ hãng Himedia nhá nhá android 7 ra để hù anh em hay thật sự đã xây dựng con Q10pro chạy trên android 7 rồi zị?
bản build lớn cũng phải test cẩn thận mà bác, thì nhiều ae cũng có bản beta test rùi đó, bản chính thức thì đang đợi hãng đẩy lên OTA release khi ngon lành nữa thôi.Hỏi thật, cái vụ hãng Himedia nhá nhá android 7 ra để hù anh em hay thật sự đã xây dựng con Q10pro chạy trên android 7 rồi zị?
vanninhthuan119
Well-Known Member
OTA được à bác?
meocon
Well-Known Member
Xưa giờ tàon up an tàon bằng USB nha a , hôm bữa có khách đang xài tốt Q10 pro ,,up OTA 1 cái là máy bất ổn phải up lại USB
Đã có Android 7 cho Q10pro
Changelog :
HMD-2.0.0 2016-11-10.213904 changlog:
1. Samba not working fixed
2. UPNP not working fixed
3. Crash of the box when click Wifi hotpot fixed
4. Wifi button and Bluetooth button not working in the More settings fixed
5. Latin input supported
6. Wrapper app supported
7. Windevine 13 supported
8. 24HZ button not working fixed
9. Fault device name in HiControl fixed
10. Fixed the wrong display ratio when side-by-side 3D movie is played in 2D
11. Add more fonts,subtitles better supported
12. Focus of the media center is optimized
Changelog :
HMD-2.0.0 2016-11-10.213904 changlog:
1. Samba not working fixed
2. UPNP not working fixed
3. Crash of the box when click Wifi hotpot fixed
4. Wifi button and Bluetooth button not working in the More settings fixed
5. Latin input supported
6. Wrapper app supported
7. Windevine 13 supported
8. 24HZ button not working fixed
9. Fault device name in HiControl fixed
10. Fixed the wrong display ratio when side-by-side 3D movie is played in 2D
11. Add more fonts,subtitles better supported
12. Focus of the media center is optimized
Link fw đâu bác
tonyqwerty
Member
ĐÂY BÁC ĐỌ KỸ TRƯỚC KHI UP NHÉ của futeko
THIS IS A COMPLICATED INSTALL PROCESS WHICH CAN BRICK YOUR Q10 PRO.
BRICKING YOUR Q10 PRO BY INSTALLING THIS FIRMWARE WILL INVALIDATE YOUR WARRANTY.
PLEASE DO NOT ATTEMPT IF YOU HAVE ANY DOUBTS. THE FINAL RELEASE WILL BE EASIER TO INSTALL.
ONLY INSTALL IF YOU WANT TO TEST THE FIRMWARE. IT'S NOT SUITABLE FOR DAY TO DAY USE. FOR EXAMPLE, THERE IS NO PLAY STORE. IF YOU WANT TO USE YOUR Q10 PRO NORMALLY STICK WITH THE ANDROID 5.1 FIRMWARE.
FOLLOW OUR INSTRUCTIONS PRECISELY!
THIS PROCESS IS FOR EUROPEAN HARDWARE Q10 PRO RUNNING ANDROID 5.1 FIRMWARE ONLY.
You must INSTALL BOTH FIRMWARES IN SEQUENCE using the restore button method.
STAGE 1. First firmware migrates from Android 5.1 to Android 7
* Rename INSTALL_THIS_FIRMWARE_TO_MIGRATE_Q10_PRO_FROM_ANDROID_5.1_TO_ANDROID_7.zip to update.zip.
* Power off Q10 Pro.
* Copy update.zip to a FAT32 formatted USB stick.
* Insert USB stick into Q10 Pro USB 2.0 port and power on box whilst holding restore button pressed down.
The box will boot into an upgrade screen (can take 5 minutes - leave it to complete!) and then reboot automatically into Android 7.
Download: http://www.mediafire.com/file/quw5k...ATE_Q10_PRO_FROM_ANDROID_5.1_TO_ANDROID_7.zip
STAGE 2. Second firmware installs the latest Android 7 FW, HMD-2.0.0 2016-11-10.213904. YOU MUST INSTALL MIGRATION FIRMWARE (STAGE 1) FIRST.
* Rename ONLY_INSTALL_THIS_FIRMWARE_AFTER_FIRST_INSTALLING_THE_ANDROID_5.1_TO_ANDROID_7_MIGRATION_FIRMWARE._INSTALLING_THIS_FIRMWARE_DIRECTLY_ON_TOP_OF_ANDROID_5.1_CAN_BRICK_YOUR_Q10_PRO._HMD-2.0.0_2016-11-10.213904.zip to update.zip
* Power off Q10 Pro.
* Copy update.zip to a FAT32 formatted USB stick.
* Insert USB stick into Q10 Pro USB 2.0 port and power on box whilst holding restore button pressed down.
The box will boot into an upgrade screen (can take 5 minutes - leave it to complete!) then reboot automatically into latest Android 7 firmware.
Download: http://www.mediafire.com/file/lac4d...YOUR_Q10_PRO._HMD-2.0.0_2016-11-10.213904.zip
How to downgrade from Android 7 version 2.0.0 firmware to Android 5.1 version 1.0.8
* Download this firmware: http://www.mediafire.com/file/ksubb..._ANDROID_5.1_AFTER_ANDROID_7_INSTALLATION.zip
* Rename Q10_PRO_RESTORE_ANDROID_5.1_AFTER_ANDROID_7_INSTALLATION.zip to update.zip.
* Power off Q10 Pro.
* Copy update.zip to a FAT32 formatted USB stick.
* Insert USB stick into Q10 Pro USB 2.0 port and power on box whilst holding restore button pressed down.
The box will boot into an upgrade screen (can take 5 minutes - leave it to complete!) and then reboot automatically into Android 5.1.
THIS IS A COMPLICATED INSTALL PROCESS WHICH CAN BRICK YOUR Q10 PRO.
BRICKING YOUR Q10 PRO BY INSTALLING THIS FIRMWARE WILL INVALIDATE YOUR WARRANTY.
PLEASE DO NOT ATTEMPT IF YOU HAVE ANY DOUBTS. THE FINAL RELEASE WILL BE EASIER TO INSTALL.
ONLY INSTALL IF YOU WANT TO TEST THE FIRMWARE. IT'S NOT SUITABLE FOR DAY TO DAY USE. FOR EXAMPLE, THERE IS NO PLAY STORE. IF YOU WANT TO USE YOUR Q10 PRO NORMALLY STICK WITH THE ANDROID 5.1 FIRMWARE.
FOLLOW OUR INSTRUCTIONS PRECISELY!
THIS PROCESS IS FOR EUROPEAN HARDWARE Q10 PRO RUNNING ANDROID 5.1 FIRMWARE ONLY.
You must INSTALL BOTH FIRMWARES IN SEQUENCE using the restore button method.
STAGE 1. First firmware migrates from Android 5.1 to Android 7
* Rename INSTALL_THIS_FIRMWARE_TO_MIGRATE_Q10_PRO_FROM_ANDROID_5.1_TO_ANDROID_7.zip to update.zip.
* Power off Q10 Pro.
* Copy update.zip to a FAT32 formatted USB stick.
* Insert USB stick into Q10 Pro USB 2.0 port and power on box whilst holding restore button pressed down.
The box will boot into an upgrade screen (can take 5 minutes - leave it to complete!) and then reboot automatically into Android 7.
Download: http://www.mediafire.com/file/quw5k...ATE_Q10_PRO_FROM_ANDROID_5.1_TO_ANDROID_7.zip
STAGE 2. Second firmware installs the latest Android 7 FW, HMD-2.0.0 2016-11-10.213904. YOU MUST INSTALL MIGRATION FIRMWARE (STAGE 1) FIRST.
* Rename ONLY_INSTALL_THIS_FIRMWARE_AFTER_FIRST_INSTALLING_THE_ANDROID_5.1_TO_ANDROID_7_MIGRATION_FIRMWARE._INSTALLING_THIS_FIRMWARE_DIRECTLY_ON_TOP_OF_ANDROID_5.1_CAN_BRICK_YOUR_Q10_PRO._HMD-2.0.0_2016-11-10.213904.zip to update.zip
* Power off Q10 Pro.
* Copy update.zip to a FAT32 formatted USB stick.
* Insert USB stick into Q10 Pro USB 2.0 port and power on box whilst holding restore button pressed down.
The box will boot into an upgrade screen (can take 5 minutes - leave it to complete!) then reboot automatically into latest Android 7 firmware.
Download: http://www.mediafire.com/file/lac4d...YOUR_Q10_PRO._HMD-2.0.0_2016-11-10.213904.zip
How to downgrade from Android 7 version 2.0.0 firmware to Android 5.1 version 1.0.8
* Download this firmware: http://www.mediafire.com/file/ksubb..._ANDROID_5.1_AFTER_ANDROID_7_INSTALLATION.zip
* Rename Q10_PRO_RESTORE_ANDROID_5.1_AFTER_ANDROID_7_INSTALLATION.zip to update.zip.
* Power off Q10 Pro.
* Copy update.zip to a FAT32 formatted USB stick.
* Insert USB stick into Q10 Pro USB 2.0 port and power on box whilst holding restore button pressed down.
The box will boot into an upgrade screen (can take 5 minutes - leave it to complete!) and then reboot automatically into Android 5.1.
