Raspberry Pi + Rune Audio ::: Một trải nghiệm nghe nhạc mới

do_long_khach

Well-Known Member
Mời 4 bác tham gia a . :D

https://www.audio-linux.com/
https://www.audio-linux.com/html/rpi4.html
https://www.audio-linux.com/html/paypal/index.html

a719b0bda894525a37be149f8bf0e3d3.jpg


150k/suất/support 1 năm : Acc mình quản lý khi nào có ver mới mình pm các bác . Ai trải nghiệm Audiolinux pm a . ( đương nhiên up online bất cứ lúc nào a chỉ mình vọc hơi chán hihi ) . o_O


0560d9cc29d19f031e99a69b8089ca0a.jpg



bbb8d5dc52db1fcae5685adfaf5317a1.jpg



AudioLinux nhắn nhủ :
---------------------------
IMPORTANT notice about update:
The updating process in Audiolinux is done with
1) Audiolinux menu
2) Kernel. This is compiled by audiolinux with some changes. Since a full system update could be necessary before new kernel installation, please see disclaimer at point 3)
3) System update, not controlled by Audiolinux. This is standard Archlinux update.
In some cases system update could be problematic for users not expert in linux.
This is a normal occurrence in linux "rolling release" like Audiolinux/Archlinux
A user does not need to make a system update. Menu update is enough.
If you decide to update, please do it frequently, before installation is too old.
Audiolinux will release a new version every 2 months with full package update, if the user want to reinstall an updated OS.

Best regards,
Piero

Rất nhiều mục cài đặt khám phá âm thanh tuyệt : lms , squeezelite , roon birdge , core isolator , upnp , ramroot ( tối thiểu ram 4gb chạy ngọt ngào ) . :D


JqPWWa.jpg


JqPrE1.jpg
quen tidal connect mất rồi ko thì cũng theo bác....
 

linh0983

Well-Known Member
Mới đu theo kèo euphony, loay hoay bữa giờ, em thích chất âm của nó. Không biết AL này có hợp với dàn của em không nữa
quen tidal connect mất rồi ko thì cũng theo bác....
Audio là không giới hạn mà các bác thích là chơi thôi cùng chơi cùng thảo luận là cái thú nhất trên đời . Mình thấy các bác chơi chim cảnh không khác gì dân chơi audio a . :D
 

linh0983

Well-Known Member
Vẩn là chiêu cũ cho MoOde 7.3.0 các bác a . :p
# Tidal connect
curl -sSL https://raw.githubusercontent.com/shawaj/HiTide/main/install.sh | sudo bash

Mã:
Using username "pi".
[email protected]'s password:
Access denied
[email protected]'s password:
RaspiOS 10.6 | 5.4.77-v7+ #1371 | armv7l (32-bit)

                      ____     __        ____
          __ _  ___  / __ \___/ /__     /_  /
         /  ' \/ _ \/ /_/ / _  / -_)     / /
        /_/_/_/\___/\____/\_,_/\__/     /_/

                 moOde audio player
              Release 7.3.0 2021-06-25
                (C) 2014 Tim Curtis


The programs included with moOde are free software; the
exact distribution terms for each program are described
in the individual files in /usr/share/doc/*/copyright.
Moode comes with absolutely no warranties expressed or
implied, or any other guarantees.

pi@moode:~ $ curl -sSL https://raw.githubusercontent.com/shawaj/HiTide/main/install.sh | sudo bash
Get:1 http://archive.raspberrypi.org/debian buster InRelease [32.6 kB]
Get:2 http://raspbian.raspberrypi.org/raspbian buster InRelease [15.0 kB]
Get:3 http://archive.raspbian.org/raspbian stretch InRelease [15.0 kB]
Get:4 http://archive.raspberrypi.org/debian buster/main armhf Packages [376 kB]
Get:5 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages [13.0 MB]
Get:6 http://archive.raspbian.org/raspbian stretch/main armhf Packages [11.7 MB]
Get:7 http://raspbian.raspberrypi.org/raspbian buster/contrib armhf Packages [58.7 kB]
Get:8 http://raspbian.raspberrypi.org/raspbian buster/non-free armhf Packages [104 kB]
Fetched 25.3 MB in 37s (676 kB/s)
Reading package lists... Done
Building dependency tree
Reading state information... Done
198 packages can be upgraded. Run 'apt list --upgradable' to see them.
Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting 'libportaudio2' for glob 'libportaudio2*'
Note, selecting 'libflac++6v5' for glob 'libflac++6v5*'
git is already the newest version (1:2.20.1-2+deb10u3).
multiarch-support is already the newest version (2.28-10+rpi1).
The following additional packages will be installed:
  libavahi-client-dev libavahi-common-dev libavcodec57 libavutil55 libbluray1 libportaudiocpp0 libswresample2 libva-drm1 libva-x11-1 libva1 libvpx4
  libwebpmux2 libx264-148 libx265-95 portaudio19-dev
Suggested packages:
  libbluray-bdj portaudio19-doc
The following NEW packages will be installed:
  libavcodec57 libavformat57 libavutil55 libbluray1 libflac++6v5 libswresample2 libva-drm1 libva-x11-1 libva1 libvpx4 libwebpmux2 libx264-148
  libx265-95
The following packages will be upgraded:
  alsa-utils libavahi-client-dev libavahi-client3 libavahi-common-dev libavahi-common3 libportaudio2 libportaudiocpp0 portaudio19-dev
8 upgraded, 13 newly installed, 0 to remove and 190 not upgraded.
Need to get 8,798 kB of archives.
After this operation, 21.7 MB of additional disk space will be used.
Get:1 http://archive.raspberrypi.org/debian buster/main armhf alsa-utils armhf 1.1.8-2+rpt1 [1,010 kB]
Get:2 http://mirror.ossplanet.net/raspbian/raspbian buster/main armhf libavahi-common-dev armhf 0.7-4+deb10u1 [65.1 kB]
Get:3 http://mirror.ossplanet.net/raspbian/raspbian buster/main armhf libavahi-common3 armhf 0.7-4+deb10u1 [51.0 kB]
Get:4 http://archive.raspbian.org/raspbian stretch/main armhf libva1 armhf 1.7.3-2 [46.2 kB]
Get:5 http://mirror.ossplanet.net/raspbian/raspbian buster/main armhf libavahi-client-dev armhf 0.7-4+deb10u1 [64.1 kB]
Get:6 http://archive.raspbian.org/raspbian stretch/main armhf libva-drm1 armhf 1.7.3-2 [14.5 kB]
Get:7 http://archive.raspbian.org/raspbian stretch/main armhf libva-x11-1 armhf 1.7.3-2 [18.0 kB]
Get:8 http://archive.raspbian.org/raspbian stretch/main armhf libavutil55 armhf 7:3.2.15-0+deb9u2 [246 kB]
Get:9 http://mirror.ossplanet.net/raspbian/raspbian buster/main armhf libavahi-client3 armhf 0.7-4+deb10u1 [54.0 kB]
Get:10 http://archive.raspbian.org/raspbian stretch/main armhf libswresample2 armhf 7:3.2.15-0+deb9u2 [102 kB]
Get:11 http://archive.raspbian.org/raspbian stretch/main armhf libvpx4 armhf 1.6.1-3+deb9u2 [432 kB]
Get:13 http://archive.raspbian.org/raspbian stretch/main armhf libwebpmux2 armhf 0.5.2-1+deb9u1 [80.4 kB]
Get:14 http://archive.raspbian.org/raspbian stretch/main armhf libx264-148 armhf 2:0.148.2748+git97eaef2-1+rpi1 [786 kB]
Get:15 http://archive.raspbian.org/raspbian stretch/main armhf libx265-95 armhf 2.1-2 [447 kB]
Get:17 http://archive.raspbian.org/raspbian stretch/main armhf libavcodec57 armhf 7:3.2.15-0+deb9u2 [4,170 kB]
Get:16 http://mirror.ossplanet.net/raspbian/raspbian buster/main armhf portaudio19-dev armhf 19.6.0-1+deb10u1 [98.5 kB]
Get:18 http://archive.raspbian.org/raspbian stretch/main armhf libbluray1 armhf 1:0.9.3-3 [122 kB]
Get:20 http://archive.raspbian.org/raspbian stretch/main armhf libavformat57 armhf 7:3.2.15-0+deb9u2 [882 kB]
Get:19 http://mirror.ossplanet.net/raspbian/raspbian buster/main armhf libportaudiocpp0 armhf 19.6.0-1+deb10u1 [16.7 kB]
Get:21 http://mirror.ossplanet.net/raspbian/raspbian buster/main armhf libportaudio2 armhf 19.6.0-1+deb10u1 [56.7 kB]
Get:12 https://mirror.freedif.org/Raspbian/raspbian buster/main armhf libflac++6v5 armhf 1.3.2-3 [34.7 kB]
Fetched 8,798 kB in 9s (989 kB/s)
apt-listchanges: Reading changelogs...
(Reading database ... 68296 files and directories currently installed.)
Preparing to unpack .../00-alsa-utils_1.1.8-2+rpt1_armhf.deb ...
Unpacking alsa-utils (1.1.8-2+rpt1) over (1.1.8-2) ...
Preparing to unpack .../01-libavahi-common-dev_0.7-4+deb10u1_armhf.deb ...
Unpacking libavahi-common-dev:armhf (0.7-4+deb10u1) over (0.7-4+b1) ...
Preparing to unpack .../02-libavahi-common3_0.7-4+deb10u1_armhf.deb ...
Unpacking libavahi-common3:armhf (0.7-4+deb10u1) over (0.7-4+b1) ...
Preparing to unpack .../03-libavahi-client-dev_0.7-4+deb10u1_armhf.deb ...
Unpacking libavahi-client-dev:armhf (0.7-4+deb10u1) over (0.7-4+b1) ...
Preparing to unpack .../04-libavahi-client3_0.7-4+deb10u1_armhf.deb ...
Unpacking libavahi-client3:armhf (0.7-4+deb10u1) over (0.7-4+b1) ...
Selecting previously unselected package libva1:armhf.
Preparing to unpack .../05-libva1_1.7.3-2_armhf.deb ...
Unpacking libva1:armhf (1.7.3-2) ...
Selecting previously unselected package libva-drm1:armhf.
Preparing to unpack .../06-libva-drm1_1.7.3-2_armhf.deb ...
Unpacking libva-drm1:armhf (1.7.3-2) ...
Selecting previously unselected package libva-x11-1:armhf.
Preparing to unpack .../07-libva-x11-1_1.7.3-2_armhf.deb ...
Unpacking libva-x11-1:armhf (1.7.3-2) ...
Selecting previously unselected package libavutil55:armhf.
Preparing to unpack .../08-libavutil55_7%3a3.2.15-0+deb9u2_armhf.deb ...
Unpacking libavutil55:armhf (7:3.2.15-0+deb9u2) ...
Selecting previously unselected package libswresample2:armhf.
Preparing to unpack .../09-libswresample2_7%3a3.2.15-0+deb9u2_armhf.deb ...
Unpacking libswresample2:armhf (7:3.2.15-0+deb9u2) ...
Selecting previously unselected package libvpx4:armhf.
Preparing to unpack .../10-libvpx4_1.6.1-3+deb9u2_armhf.deb ...
Unpacking libvpx4:armhf (1.6.1-3+deb9u2) ...
Selecting previously unselected package libwebpmux2:armhf.
Preparing to unpack .../11-libwebpmux2_0.5.2-1+deb9u1_armhf.deb ...
Unpacking libwebpmux2:armhf (0.5.2-1+deb9u1) ...
Selecting previously unselected package libx264-148:armhf.
Preparing to unpack .../12-libx264-148_2%3a0.148.2748+git97eaef2-1+rpi1_armhf.deb ...
Unpacking libx264-148:armhf (2:0.148.2748+git97eaef2-1+rpi1) ...
Selecting previously unselected package libx265-95:armhf.
Preparing to unpack .../13-libx265-95_2.1-2_armhf.deb ...
Unpacking libx265-95:armhf (2.1-2) ...
Selecting previously unselected package libavcodec57:armhf.
Preparing to unpack .../14-libavcodec57_7%3a3.2.15-0+deb9u2_armhf.deb ...
Unpacking libavcodec57:armhf (7:3.2.15-0+deb9u2) ...
Selecting previously unselected package libbluray1:armhf.
Preparing to unpack .../15-libbluray1_1%3a0.9.3-3_armhf.deb ...
Unpacking libbluray1:armhf (1:0.9.3-3) ...
Selecting previously unselected package libavformat57:armhf.
Preparing to unpack .../16-libavformat57_7%3a3.2.15-0+deb9u2_armhf.deb ...
Unpacking libavformat57:armhf (7:3.2.15-0+deb9u2) ...
Selecting previously unselected package libflac++6v5:armhf.
Preparing to unpack .../17-libflac++6v5_1.3.2-3_armhf.deb ...
Unpacking libflac++6v5:armhf (1.3.2-3) ...
Preparing to unpack .../18-portaudio19-dev_19.6.0-1+deb10u1_armhf.deb ...
Unpacking portaudio19-dev:armhf (19.6.0-1+deb10u1) over (19.6.0-1) ...
Preparing to unpack .../19-libportaudiocpp0_19.6.0-1+deb10u1_armhf.deb ...
Unpacking libportaudiocpp0:armhf (19.6.0-1+deb10u1) over (19.6.0-1) ...
Preparing to unpack .../20-libportaudio2_19.6.0-1+deb10u1_armhf.deb ...
Unpacking libportaudio2:armhf (19.6.0-1+deb10u1) over (19.6.0-1) ...
Setting up libportaudio2:armhf (19.6.0-1+deb10u1) ...
Setting up libavahi-common3:armhf (0.7-4+deb10u1) ...
Setting up libva1:armhf (1.7.3-2) ...
Setting up libx264-148:armhf (2:0.148.2748+git97eaef2-1+rpi1) ...
Setting up libx265-95:armhf (2.1-2) ...
Setting up libportaudiocpp0:armhf (19.6.0-1+deb10u1) ...
Setting up portaudio19-dev:armhf (19.6.0-1+deb10u1) ...
Setting up alsa-utils (1.1.8-2+rpt1) ...
Setting up libva-drm1:armhf (1.7.3-2) ...
Setting up libva-x11-1:armhf (1.7.3-2) ...
Setting up libavahi-common-dev:armhf (0.7-4+deb10u1) ...
Setting up libwebpmux2:armhf (0.5.2-1+deb9u1) ...
Setting up libvpx4:armhf (1.6.1-3+deb9u2) ...
Setting up libflac++6v5:armhf (1.3.2-3) ...
Setting up libavahi-client3:armhf (0.7-4+deb10u1) ...
Setting up libbluray1:armhf (1:0.9.3-3) ...
Setting up libavahi-client-dev:armhf (0.7-4+deb10u1) ...
Setting up libavutil55:armhf (7:3.2.15-0+deb9u2) ...
Setting up libswresample2:armhf (7:3.2.15-0+deb9u2) ...
Setting up libavcodec57:armhf (7:3.2.15-0+deb9u2) ...
Setting up libavformat57:armhf (7:3.2.15-0+deb9u2) ...
Processing triggers for systemd (241-7~deb10u4+rpi1) ...
Processing triggers for man-db (2.8.5-2) ...
Processing triggers for libc-bin (2.28-10+rpi1) ...
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  850k  100  850k    0     0  3015k      0 --:--:-- --:--:-- --:--:-- 3026k
Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting 'libssl1.0.0' instead of './libssl1.0.0_1.0.1t-1+deb8u12_armhf.deb'
The following NEW packages will be installed:
  libssl1.0.0
0 upgraded, 1 newly installed, 0 to remove and 190 not upgraded.
Need to get 0 B/871 kB of archives.
After this operation, 1,910 kB of additional disk space will be used.
Get:1 /usr/ifi/libssl1.0.0_1.0.1t-1+deb8u12_armhf.deb libssl1.0.0 armhf 1.0.1t-1+deb8u12 [871 kB]
Preconfiguring packages ...
Selecting previously unselected package libssl1.0.0:armhf.
(Reading database ... 68375 files and directories currently installed.)
Preparing to unpack .../libssl1.0.0_1.0.1t-1+deb8u12_armhf.deb ...
Unpacking libssl1.0.0:armhf (1.0.1t-1+deb8u12) ...
Setting up libssl1.0.0:armhf (1.0.1t-1+deb8u12) ...
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  231k  100  231k    0     0   224k      0  0:00:01  0:00:01 --:--:--  224k
Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting 'libcurl3' instead of './libcurl3_7.38.0-4+deb8u16_armhf.deb'
The following packages were automatically installed and are no longer required:
  cmake-data librhash0 libuv1
Use 'sudo apt autoremove' to remove them.
The following additional packages will be installed:
  cmake-data
The following packages will be REMOVED:
  cmake curl libcurl4 rpi-update
The following NEW packages will be installed:
  libcurl3
The following packages will be upgraded:
  cmake-data
1 upgraded, 1 newly installed, 4 to remove and 185 not upgraded.
Need to get 1,628 kB/1,866 kB of archives.
After this operation, 13.1 MB disk space will be freed.
Get:1 /usr/ifi/libcurl3_7.38.0-4+deb8u16_armhf.deb libcurl3 armhf 7.38.0-4+deb8u16 [237 kB]
Get:2 http://archive.raspberrypi.org/debian buster/main armhf cmake-data all 3.16.3-3~bpo10+1 [1,628 kB]
Fetched 1,628 kB in 2s (755 kB/s)
apt-listchanges: Reading changelogs...
(Reading database ... 68395 files and directories currently installed.)
Removing cmake (3.13.4-1) ...
Removing rpi-update (20200409) ...
Removing curl (7.64.0-4+deb10u1) ...
Removing libcurl4:armhf (7.64.0-4+deb10u1) ...
Selecting previously unselected package libcurl3:armhf.
(Reading database ... 68362 files and directories currently installed.)
Preparing to unpack .../libcurl3_7.38.0-4+deb8u16_armhf.deb ...
Unpacking libcurl3:armhf (7.38.0-4+deb8u16) ...
Preparing to unpack .../cmake-data_3.16.3-3~bpo10+1_all.deb ...
Unpacking cmake-data (3.16.3-3~bpo10+1) over (3.13.4-1) ...
Setting up libcurl3:armhf (7.38.0-4+deb8u16) ...
Setting up cmake-data (3.16.3-3~bpo10+1) ...
Processing triggers for man-db (2.8.5-2) ...
Processing triggers for libc-bin (2.28-10+rpi1) ...
Cloning into 'ifi-tidal-release'...
remote: Enumerating objects: 64, done.
remote: Counting objects: 100% (64/64), done.
remote: Compressing objects: 100% (53/53), done.
remote: Total 64 (delta 15), reused 39 (delta 1), pack-reused 0
Unpacking objects: 100% (64/64), done.
● ifi-streamer-tidal-connect.service - RasPi Streamer Tidal Connect Service
   Loaded: loaded (/lib/systemd/system/ifi-streamer-tidal-connect.service; disabled; vendor preset: enabled)
   Active: active (running) since Sun 2021-07-18 15:09:22 +07; 76ms ago
Main PID: 6361 (tidal_connect_a)
    Tasks: 1 (limit: 2063)
   CGroup: /system.slice/ifi-streamer-tidal-connect.service
           └─6361 /usr/ifi/ifi-tidal-release/bin/tidal_connect_application --tc-certificate-path /usr/ifi/ifi-tidal-release/id_certificate/IfiAudio_Ze

Jul 18 15:09:22 moode systemd[1]: Started RasPi Streamer Tidal Connect Service.
lines 1-9/9 (END)

Sau khi install nhắc khởi động cho lần sau a . :cool:

sudo systemctl daemon-reload
sudo systemctl start ifi-streamer-tidal-connect.service
sudo systemctl status ifi-streamer-tidal-connect.service
sudo systemctl enable ifi-streamer-tidal-connect.service

Rất tiếc Audiolinux cho Pi4 ko cài được TC : Arch64 ui . . . :cool:

e56219294006a67aef99e470cba2a95b.jpg
 

quatmo

Well-Known Member
Mời các bác dùng cho Pi 4. Pi 2,3 mình chưa test.

piCorePlayer 8.0 mới ra lò gần đây

- PCP Setting: IP/
- LMS Player: IP:9000/
- Aplayer/Radio: IP:7778/
- AP (UPNP) Setting: IP: 7779/
- AP Menu (start/stop AP, RoonBridge): IP:7780/
- Mod TC

Setting cho Soptify Connect, Qobuz, Youtube, iTunes.. các bác vào LMS Player -> Setting -> Server -> Chọn trong box setting tương ứng. Bác nào dùng Apple Music test thử với iTunes nhé.

Đọc thấy người dùng trong diễn đàn slimdevices nói bản 8.0 âm thanh hay hơn (Kernel khá mới 5.10.42).

Bản này chạy player custom-squeezelite để isolated CPUs, optimized.. Bác nào rảnh có thể download bản piCorePlayer gốc về nghe squeezelite so với custom-squeezelite xem như thế nào.

https://drive.google.com/file/d/1F2PvoO7UIDdPVYdmlmHozNkeWNtalB5k
Update lại link (bản trước bị lỗi hay ngắt TC)
 
Chỉnh sửa lần cuối:

linh0983

Well-Known Member
Minimserver2 hoàn hảo anh a mount nas chưa được anh ơi ! File gốc updata lâu quá cuối cũng xong .
Đức mount nas như vầy : ( chọn cifs , vers 1.0 hoặc 2.0 , user pass đang dùng ) . :eek:

003a98e2e633351356024b01005d9659.jpg


Mã:
This is a custom AudioLinux script for mounting remote share with samba (cifs) or nfs
© Piero Olmeda - All rights reserved

****************************************

These are your remote mounts:

NFS:
You don't have folders mounted with nfs in /etc/fstab
CIFS/SAMBA:
You don't have folders mounted with cifs/samba in /etc/fstab

Please insert share type (cifs or nfs):
cifs
This is a list of your samba devices on local network:
(Please wait... Scanning the network)

192.168.1.1
192.168.1.103
192.168.1.108
192.168.1.109
192.168.1.114
192.168.1.123
192.168.1.125
192.168.1.139
192.168.1.146
192.168.1.149
192.168.1.159
|   //192.168.1.159/IPC$:
|   //192.168.1.159/NAS:
|   //192.168.1.159/Playlists:
|   //192.168.1.159/Radio:
|   //192.168.1.159/SDCard:
192.168.1.179
192.168.1.187
192.168.1.189
192.168.1.127
Nmap done: 256 IP addresses (15 hosts up) scanned in 27.75 seconds

Please insert samba version (1.0 2.0 2.1 3.0 etc. Press ENTER for default):
1.0
Please type local mount folder
For example linux1, linux2... windows1, windows2... samba1, samba2  etc. This will be a sub-folder of /media
Don't type an already used folder
mouse

Please insert remote share user:
linh0983
Please insert remote share password:
Please insert remote share ip address:
honddpy.ddns.net
Please insert remote share folder:
share/MUSIC

IPADDRESS: honddpy.ddns.net
USER: linh0983
FOLDER: share/MUSIC
TYPE: cifs
VERSION: 1.0
MOUNT DIRECTORY: /media/mouse

Your share is now mounted to /media/mouse
Do you want to mount this share automatically at boot?
y = YES
n = Restart script
e = Exit
?y

The new mount line
//honddpy.ddns.net/share/MUSIC /media/mouse cifs vers=1.0,nofail,rw,x-systemd.automount,x-systemd.requires=network-online.target,x-systemd.device-timeout=10,uid=1000,gid=1000,forceuid,forcegid,user=linh0983,password=6Si@l 0 0
has been added to /etc/fstab

Cứ dò theo bảng này là xong . ( scan rất nhanh ) . :oops:
 
Chỉnh sửa lần cuối:

chipphone

Active Member
Đức mount nas như vầy : ( chọn cifs , vers 1.0 hoặc 2.0 , user pass đang dùng ) . :eek:

003a98e2e633351356024b01005d9659.jpg


Mã:
This is a custom AudioLinux script for mounting remote share with samba (cifs) or nfs
© Piero Olmeda - All rights reserved

****************************************

These are your remote mounts:

NFS:
You don't have folders mounted with nfs in /etc/fstab
CIFS/SAMBA:
You don't have folders mounted with cifs/samba in /etc/fstab

Please insert share type (cifs or nfs):
cifs
This is a list of your samba devices on local network:
(Please wait... Scanning the network)

192.168.1.1
192.168.1.103
192.168.1.108
192.168.1.109
192.168.1.114
192.168.1.123
192.168.1.125
192.168.1.139
192.168.1.146
192.168.1.149
192.168.1.159
|   //192.168.1.159/IPC$:
|   //192.168.1.159/NAS:
|   //192.168.1.159/Playlists:
|   //192.168.1.159/Radio:
|   //192.168.1.159/SDCard:
192.168.1.179
192.168.1.187
192.168.1.189
192.168.1.127
Nmap done: 256 IP addresses (15 hosts up) scanned in 27.75 seconds

Please insert samba version (1.0 2.0 2.1 3.0 etc. Press ENTER for default):
1.0
Please type local mount folder
For example linux1, linux2... windows1, windows2... samba1, samba2  etc. This will be a sub-folder of /media
Don't type an already used folder
mouse

Please insert remote share user:
linh0983
Please insert remote share password:
Please insert remote share ip address:
honddpy.ddns.net
Please insert remote share folder:
share/MUSIC

IPADDRESS: honddpy.ddns.net
USER: linh0983
FOLDER: share/MUSIC
TYPE: cifs
VERSION: 1.0
MOUNT DIRECTORY: /media/mouse

Your share is now mounted to /media/mouse
Do you want to mount this share automatically at boot?
y = YES
n = Restart script
e = Exit
?y

The new mount line
//honddpy.ddns.net/share/MUSIC /media/mouse cifs vers=1.0,nofail,rw,x-systemd.automount,x-systemd.requires=network-online.target,x-systemd.device-timeout=10,uid=1000,gid=1000,forceuid,forcegid,user=linh0983,password=6!Si@l 0 0
has been added to /etc/fstab

Cứ dò theo bảng này là xong . ( scan rất nhanh ) . :oops:
Raspberry trên network đã thấy nó hỏi user pass anh a ?
 

quatmo

Well-Known Member
Mời các bác dùng cho Pi 4. Pi 2,3 mình chưa test.

piCorePlayer 8.0 mới ra lò gần đây

- PCP Setting: IP/
- LMS Player: IP:9000/
- Aplayer/Radio: IP:7778/
- AP (UPNP) Setting: IP: 7779/
- AP Menu (start/stop AP, RoonBridge): IP:7780/
- Mod TC

Setting cho Soptify Connect, Qobuz, Youtube, iTunes.. các bác vào LMS Player -> Setting -> Server -> Chọn trong box setting tương ứng. Bác nào dùng Apple Music test thử với iTunes nhé.

Đọc thấy người dùng trong diễn đàn slimdevices nói bản 8.0 âm thanh hay hơn (Kernel khá mới 5.10.42).

Bản này chạy player custom-squeezelite để isolated CPUs, optimized.. Bác nào rảnh có thể download bản piCorePlayer gốc về nghe squeezelite so với custom-squeezelite xem như thế nào.

https://drive.google.com/file/d/1F2PvoO7UIDdPVYdmlmHozNkeWNtalB5k
Update lại link (bản trước bị lỗi hay ngắt TC)

Mình Update lại link (bản trước bị lỗi hay ngắt TC).
 

linh0983

Well-Known Member
@htklinh74 : Chú dac này về chưa a .

https://item.taobao.com/item.htm?sp...cCJB1&id=631296967091&ns=1&abbucket=20#detail

Audiolinux xuất âm thanh cùng lúc khác nhau ra 2 ngõ .

1_ Cổng USB cho dac ngoài .
2_ GPIO cho dac hat kia .

Cấu hình cho mỗi đứa 1 core riêng , dac đèn nghe nhạc vàng , dac hat nghe hòa tấu .

Phát bằng roon là xướng nhất riêng lẻ hoặc đồng thời khác nhau bác a . :oops:

P/S : Cấp nguồn Sigma11 cho Pi4 thông qua jack 3.5 trên dac hat cho âm thanh tốt nhất .
 
Chỉnh sửa lần cuối:

quatmo

Well-Known Member
Audiolinux xuất âm thanh cùng lúc khác nhau ra 2 ngõ .

1_ Cổng USB cho dac ngoài .
2_ GPIO cho dac hat kia .

Cấu hình cho mỗi đứa 1 core riêng , dac đèn nghe nhạc vàng , dac hat nghe hòa tấu .

Phát bằng roon là xướng nhất riêng lẻ hoặc đồng thời khác nhau bác a . :oops:

P/S : Cấp nguồn Sigma11 cho Pi4 thông qua jack 3.5 trên dac hat cho âm thanh tốt nhất .
Em thích vụ này, lát chiều em vọc AL.
 

tml3nr

Moderator
Loay hoay mà Thúy Nga Music Box ra tới #37 rồi ạ o_O
Thu hình trong khoảng từ ngày 18 tháng 7 năm 2020 đến trước dịp Tết Tân Sửu 2021
Thu hình sau dịp Tết Tân Sửu 2021
Thúy Nga mới ra bộ Music Box. Đã có đủ trên các dịch vụ nhạc online các anh ạ :rolleyes:

https://vi.wikipedia.org/wiki/Danh_sách_sản_phẩm_của_Trung_tâm_Thúy_Nga#Thuy_Nga_Music_Box

https://thuy-nga-paris-by-night.fandom.com/vi/wiki/Thúy_Nga_Music_Box

tn-musicbox.jpg


Thúy Nga Music Box #1 - Tâm Tình Mẹ (Youtube only)


Thúy Nga Music Box #2 - Ca sĩ Mai Thiên Vân

https://listen.tidal.com/album/144549489

Thúy Nga Music Box #3 - Nơi Tình Yêu Bắt Đầu

https://listen.tidal.com/album/144823775

Thúy Nga Music Box #4 - Nhớ Người Yêu

https://listen.tidal.com/album/147105553

Thúy Nga Music Box #5 - Tình Cha

https://listen.tidal.com/album/147684383

Thúy Nga Music Box #6 - Tình Ca Thái Thịnh

https://listen.tidal.com/album/148637681

Thúy Nga Music Box #7 - Chỉ Có Em

https://listen.tidal.com/album/149498629

Thúy Nga Music Box #8 - Tuyết Lạnh

https://listen.tidal.com/album/150233109

Thúy Nga Music Box #9 - Dĩ Vãng

https://listen.tidal.com/album/150964753

Thúy Nga Music Box #10 - Giờ Này Anh Ở Đâu

https://listen.tidal.com/album/151739487

Thúy Nga Music Box #11 - Yêu Lại Từ Đầu

https://listen.tidal.com/album/154608779

Thúy Nga Music Box #12 - Tình Ca Lam Phương

https://listen.tidal.com/album/155966584

Thúy Nga Music Box #13 - Top Hits 2002 - 2020

https://listen.tidal.com/album/155831452

Thúy Nga Music Box #14 - Người Đứng Sau Hạnh Phúc

https://listen.tidal.com/album/156545903

Thúy Nga Music Box #15 - Nhớ Nhau Hoài

https://tidal.com/browse/album/157540173

Thúy Nga Music Box #16 - Tình Ca Lê Quang

https://listen.tidal.com/album/158324818
 

tml3nr

Moderator
Hi anh @linh0983 , anh @quatmo và cả nhà.

Bao nhiêu năm vật vã. Hôm nay em mò ra được cái vụ rename bỏ dấu tiếng Việt này hay quá.

Em không tiếc 100k cho software Rename File của bạn Phan Hoàng Nhân. Nhưng cái PC của em hay cài lại Windows nên em mệt cái vụ active của bạn ấy.

Đơn giản lắm các anh ạ :rolleyes:

https://www.advancedrenamer.com/forum_thread?forum_id=3964

advanced-renamer.png
 

linh0983

Well-Known Member
Chỗ bác Hải có mưa ko bên đây mưa lớn lắm đang download mấy đĩa nhạc chưa xong rớt mạng . :rolleyes:
Họ cấp cho mình mã kích hoạt khi mua mà bác tool đó đa năng a . 3919-D04F-16FB-6132-06B1.license (vd)
 
Chỉnh sửa lần cuối:
Bên trên