Raspberry Pi + Rune Audio ::: Một trải nghiệm nghe nhạc mới

linh0983 · 5/12/23

quatmo đã viết:
Cái này em dùng 6.1.64-2-rpi-ARCH phiên bản mới Linux hơn để phục vụ cho việc build driver Linux cũ hơn, em nghĩ là bản mới luôn hỗ trợ driver cho bản cũ, nên build không có vấn đề gì anh.

Sẵn cắm Pi 2 build luôn một loạt driver cho nhiều usb wifi, phù hợp nhiều dòng mới hiện nay tốc độ cao 600, 1200, wifi 5 1300 và wifi 6 1800. Các bác có thể tìm mua theo từ khóa, ví dụ driver 8852bu dùng cho rtl8832bu shoppe, rtl8812bu, rtl8822bu shoppe. Mình tìm theo chip hầu hết có bán, hàng China ship tốc độ 1300 có cái chỉ 140k.

Sẵn order mấy chú ic cho dac502pro tôi thử order chú COMFAST CF-812ACv2 (RTL8812BU) .

https://detail.tmall.com/item.htm?abbucket=7&id=598112118112&ns=1&skuId=4162886332404&spm=a21n57.1.0.0.532b523cO8rEIP

Với USB2.0(Pi2) chú này nhỏ gọn đủ dùng ạ .

linh0983 · 5/12/23

COMFAST CF-972AX Chipset: RTL8832CU .

https://detail.tmall.com/item.htm?abbucket=7&id=735384044955&ns=1&skuId=5081989340131&spm=a21n57.1.0.0.6627183fExwCBS

Chú này dùng cho PC là ngon các bác ạ .

toi511 · 5/12/23

linh0983 đã viết:
Sẵn order mấy chú ic cho dac502pro tôi thử order chú COMFAST CF-812ACv2 (RTL8812BU) .

https://detail.tmall.com/item.htm?abbucket=7&id=598112118112&ns=1&skuId=4162886332404&spm=a21n57.1.0.0.532b523cO8rEIP

Với USB2.0(Pi2) chú này nhỏ gọn đủ dùng ạ .

oder cho em 1 chú với anh

linh0983 · 5/12/23

toi511 đã viết:
order cho em 1 chú với anh .

Vâng ạ . ( order 2 kiểu tùy bác chọn khi về hihi ) .

Cả 2 cùng 1 cấu hình dùng chipset RTL8812BU .

toi511 · 5/12/23

Cái 1 nha anh

linh0983 · 5/12/23

quatmo đã viết:
Sorry anh, em hướng dẫn build sai thứ tự, nên lệnh mv không đúng. Em ghi thẻ mới, build lại mới thấy sai thứ tự lệnh mv.

Đã cập nhật lại, anh thử xem.

https://github.com/lovehifi/8814au_raudio

Chạy cài make install xong mà hiện vậy là OK

Mã:

install -p -m 644 8814au.ko /lib/modules/6.1.58-2-rpi-ARCH/kernel/drivers/net/wireless/ /sbin/depmod -a 6.1.58-2-rpi-ARCH

Hoặc cách khác anh bỏ qua bước #10 và #11, cài tự động với script:

Mã:

sudo ./install-driver.sh

Làm thẻ mới pass cùng lúc 11 dòng : RTL8812AU cài driver thàng công nhưng rAudio 32bit vẫn chưa thấy CF-917 bác Lâm ạ ( mò mẫm cho biết driver chú này khó chịu đến đâu ui ? ) .

sudo pacman -Syu (n)
sudo pacman -S linux-rpi-headers
sudo mv -f /usr/lib/modules/6.1.64-2-rpi-ARCH/build /usr/lib/modules/6.1.58-2-rpi-ARCH/
sudo pacman -S base-devel
sudo pacman -S bc
sudo pacman -S git
git clone https://github.com/aircrack-ng/rtl8812au.git
cd rtl8812au
git pull
make
sudo make install

Mã:

   r A u d i o


rAudio:~  #  sudo pacman -Syu
sudo pacman -S linux-rpi-headers
sudo mv -f /usr/lib/modules/6.1.64-2-rpi-ARCH/build /usr/lib/modules/6.1.58-2-rpi-ARCH/
sudo pacman -S base-devel
sudo pacman -S bc
sudo pacman -S git
git clone https://github.com/aircrack-ng/rtl8812au.git
cd rtl8812au
git pull
make
sudo make install
:: Synchronizing package databases...
 +R is up to date
 core is up to date
 extra                                                         8.9 MiB   621 KiB/s 00:15 [###################################################] 100%
 alarm is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for conflicting packages...

Packages (102) archlinux-keyring-20231130-1  avahi-1:0.8+r189+g35bb1ba-1  bash-5.2.021-1  blas-3.12.0-2  c-ares-1.23.0-1
               ca-certificates-mozilla-3.95-1  cblas-3.12.0-2  dhcpcd-10.0.5-1  dialog-1:1.3_20231002-1  ffmpeg-2:6.1-1  firefox-120.0.1-1
               gawk-5.3.0-1  gettext-0.22.4-1  glib2-2.78.1-1  gnupg-2.4.3-2  gnutls-3.8.2-1  gpgme-1.23.2-1  gssproxy-0.9.2-1
               gtk-update-icon-cache-1:4.12.4-1  harfbuzz-8.3.0-1  hwdata-0.376-1  iana-etc-20231117-1  imagemagick-7.1.1.22-1  iproute2-6.6.0-2
               iptables-1:1.8.10-1  krb5-1.20.1-2  lapack-3.12.0-2  libass-0.17.1-2  libcap-2.69-3  libcloudproviders-0.3.5-1  libdrm-2.4.118-1
               libelf-0.190-1  libgcrypt-1.10.3-1  libjpeg-turbo-3.0.1-1  libksba-1.6.5-1  libnghttp2-1.58.0-1  libnpupnp-5.1.2-1  libnsl-2.0.1-1
               libp11-kit-0.25.3-1  libpipewire-1:1.0.0-2  libpulse-16.1-7  libsndfile-1.2.2-2  libsoup3-3.4.4-1  libsysprof-capture-45.1-1
               libtiff-4.6.0-2  libunibreak-5.1-1  libunwind-1.7.2-1  libupnpp-0.24.1-1  liburing-2.5-1  libuv-1.47.0-1  libwacom-2.9.0-2
               libwbclient-4.19.3-1  libwebsockets-4.3.3-1  libxml2-2.12.1-1  linux-firmware-20231110.74158e7a-1
               linux-firmware-whence-20231110.74158e7a-1  linux-rpi-6.1.64-2  mkinitcpio-37.1-1  mpd-0.23.14-2  nfs-utils-2.6.4-1
               nfsidmap-2.6.4-1  nftables-1:1.0.9-1  nginx-mainline-1.25.3-1  nss-3.95-1  openssl-3.1.4-1  p11-kit-0.25.3-1  pcsclite-2.0.1-1
               php-8.2.13-1  php-fpm-8.2.13-1  python-3.11.6-1  python-attrs-23.1.0-1  python-charset-normalizer-3.3.2-1
               python-jsonschema-4.20.0-1  python-jsonschema-specifications-2023.11.2-1  python-numpy-1.26.2-1  python-referencing-0.31.1-1
               python-upnpp-0.24.0-1  python-urllib3-1.26.18-1  qt5-base-5.15.11+kde+r147-1  raspberrypi-bootloader-20231129-1
               raspberrypi-utils-20231130-1  readline-8.2.007-1  samba-4.19.3-1  sdl2-2.28.5-1  shadow-4.14.2-1  shairport-sync-4.3.2-1
               shared-mime-info-2.4-1  smbclient-4.19.3-1  sqlite-3.44.2-2  sudo-1.9.15.p2-1  systemd-254.6-2  systemd-libs-254.6-2
               systemd-sysvcompat-254.6-2  upmpdcli-1.8.6-1  util-linux-2.39.2-2  util-linux-libs-2.39.2-2  vulkan-icd-loader-1.3.269-1
               xdg-utils-1.2.0r17+g21fb316-1  xorg-server-21.1.9-1  xorg-server-common-21.1.9-1  xz-5.4.5-1  zlib-1:1.3-2

Total Download Size:    313.56 MiB
Total Installed Size:  1338.16 MiB
Net Upgrade Size:        46.98 MiB

:: Proceed with installation? [Y/n] n
resolving dependencies...
looking for conflicting packages...

Packages (1) linux-rpi-headers-6.1.64-2

Total Download Size:    9.89 MiB
Total Installed Size:  52.54 MiB

:: Proceed with installation? [Y/n] y
:: Retrieving packages...
 linux-rpi-headers-6.1.64-2-armv7h                                         9.9 MiB  1491 KiB/s 00:07 [#############################################
(1/1) checking keys in keyring                                                                       [#############################################
(1/1) checking package integrity                                                                     [#############################################
(1/1) loading package files                                                                          [#############################################
(1/1) checking for file conflicts                                                                    [#############################################
(1/1) checking available disk space                                                                  [#############################################
:: Processing package changes...
(1/1) installing linux-rpi-headers                                                                   [#############################################
:: Running post-transaction hooks...
(1/2) Arming ConditionNeedsUpdate...
(2/2) Updating module dependencies...
resolving dependencies...
looking for conflicting packages...

Packages (18) autoconf-2.71-4  automake-1.16.5-2  bison-3.8.2-6  debugedit-5.0-5  fakeroot-1.32.2-1  flex-2.6.4-5  gc-8.2.4-1  gcc-12.1.0-2.1  grof
              guile-3.0.9-1  libisl-0.26-1  libmpc-1.3.1-1  m4-1.4.19-3  make-4.4.1-2  patch-2.7.6-10  pkgconf-2.0.3-1  texinfo-7.1-2  base-devel-1

Total Download Size:    44.00 MiB
Total Installed Size:  208.53 MiB

:: Proceed with installation? [Y/n] y
:: Retrieving packages...
 gcc-12.1.0-2.1-armv7h                                                    28.8 MiB   487 KiB/s 01:01 [#############################################
 guile-3.0.9-1-armv7h                                                      6.9 MiB   377 KiB/s 00:00 [############################################# guile-3.0.9-1-armv7h                                          7.0 MiB   276 KiB/s 00:26 [###################################################] 100% groff-1.23.0-5-armv7h                                         2.0 MiB   568 KiB/s 00:04 [###################################################] 100%
 texinfo-7.1-2-armv7h                                       1601.4 KiB   330 KiB/s 00:05 [###################################################] 100%
 libisl-0.26-1-armv7h                                       1186.2 KiB   306 KiB/s 00:04 [###################################################] 100%
 bison-3.8.2-6-armv7h                                        716.8 KiB   276 KiB/s 00:03 [###################################################] 100%
 autoconf-2.71-4-any                                         638.6 KiB   246 KiB/s 00:03 [###################################################] 100%
 automake-1.16.5-2-any                                       606.5 KiB   237 KiB/s 00:03 [###################################################] 100%
 make-4.4.1-2-armv7h                                         474.2 KiB   256 KiB/s 00:02 [###################################################] 100%
 flex-2.6.4-5-armv7h                                         281.3 KiB   180 KiB/s 00:02 [###################################################] 100%
 m4-1.4.19-3-armv7h                                          228.0 KiB  73.8 KiB/s 00:03 [###################################################] 100%
 gc-8.2.4-1-armv7h                                           214.4 KiB  83.1 KiB/s 00:03 [###################################################] 100%
 patch-2.7.6-10-armv7h                                        92.9 KiB  90.2 KiB/s 00:01 [###################################################] 100%
 fakeroot-1.32.2-1-armv7h                                     73.4 KiB  96.6 KiB/s 00:01 [###################################################] 100%
 libmpc-1.3.1-1-armv7h                                        73.0 KiB  57.5 KiB/s 00:01 [###################################################] 100%
 pkgconf-2.0.3-1-armv7h                                       53.9 KiB  53.4 KiB/s 00:01 [###################################################] 100%
 debugedit-5.0-5-armv7h                                       40.7 KiB  40.3 KiB/s 00:01 [###################################################] 100%
 base-devel-1-1-any                                            2.0 KiB  3.98 KiB/s 00:01 [###################################################] 100%
 Total (18/18)                                                44.0 MiB   357 KiB/s 02:06 [###################################################] 100%
(18/18) checking keys in keyring                                                         [###################################################] 100%
(18/18) checking package integrity                                                       [###################################################] 100%
(18/18) loading package files                                                            [###################################################] 100%
(18/18) checking for file conflicts                                                      [###################################################] 100%
(18/18) checking available disk space                                                    [###################################################] 100%
:: Processing package changes...
( 1/18) installing m4                                                                    [###################################################] 100%
( 2/18) installing autoconf                                                              [###################################################] 100%
( 3/18) installing automake                                                              [###################################################] 100%
( 4/18) installing bison                                                                 [###################################################] 100%
( 5/18) installing debugedit                                                             [###################################################] 100%
( 6/18) installing fakeroot                                                              [###################################################] 100%
( 7/18) installing flex                                                                  [###################################################] 100%
( 8/18) installing libmpc                                                                [###################################################] 100%
( 9/18) installing libisl                                                                [###################################################] 100%
(10/18) installing gcc                                                                   [###################################################] 100%
(11/18) installing groff                                                                 [###################################################] 100%
Optional dependencies for groff
    netpbm: for use together with man -H command interaction in browsers
    psutils: for use together with man -H command interaction in browsers
    libxaw: for gxditview
    perl-file-homedir: for use with glilypond
(12/18) installing gc                                                                    [###################################################] 100%
(13/18) installing guile                                                                 [###################################################] 100%
(14/18) installing make                                                                  [###################################################] 100%
(15/18) installing patch                                                                 [###################################################] 100%
Optional dependencies for patch
    ed: for patch -e functionality
(16/18) installing pkgconf                                                               [###################################################] 100%
(17/18) installing texinfo                                                               [###################################################] 100%
Optional dependencies for texinfo
    perl-archive-zip: EPUB file output via texi2any
(18/18) installing base-devel                                                            [###################################################] 100%
:: Running post-transaction hooks...
(1/2) Arming ConditionNeedsUpdate...
(2/2) Updating the info directory file...
resolving dependencies...
looking for conflicting packages...

Packages (1) bc-1.07.1-4

Total Download Size:   0.08 MiB
Total Installed Size:  0.15 MiB

:: Proceed with installation? [Y/n] y
:: Retrieving packages...
 bc-1.07.1-4-armv7h                                           78.4 KiB  49.6 KiB/s 00:02 [###################################################] 100%
(1/1) checking keys in keyring                                                           [###################################################] 100%
(1/1) checking package integrity                                                         [###################################################] 100%
(1/1) loading package files                                                              [###################################################] 100%
(1/1) checking for file conflicts                                                        [###################################################] 100%
(1/1) checking available disk space                                                      [###################################################] 100%
:: Processing package changes...
(1/1) installing bc                                                                      [###################################################] 100%
:: Running post-transaction hooks...
(1/2) Arming ConditionNeedsUpdate...
(2/2) Updating the info directory file...
resolving dependencies...
looking for conflicting packages...

Packages (4) perl-error-0.17029-5  perl-mailtools-2.21-7  perl-timedate-2.33-5  git-2.43.0-1

Total Download Size:    6.09 MiB
Total Installed Size:  37.72 MiB

:: Proceed with installation? [Y/n] y
:: Retrieving packages...
 git-2.43.0-1-armv7h                                           6.0 MiB   298 KiB/s 00:21 [###################################################] 100%
 perl-mailtools-2.21-7-any                                    58.5 KiB  46.1 KiB/s 00:01 [###################################################] 100%
 perl-timedate-2.33-5-any                                     32.9 KiB  43.3 KiB/s 00:01 [###################################################] 100%
 perl-error-0.17029-5-any                                     21.0 KiB  40.4 KiB/s 00:01 [###################################################] 100%
 Total (4/4)                                                   6.1 MiB   258 KiB/s 00:24 [###################################################] 100%
(4/4) checking keys in keyring                                                           [###################################################] 100%
(4/4) checking package integrity                                                         [###################################################] 100%
(4/4) loading package files                                                              [###################################################] 100%
(4/4) checking for file conflicts                                                        [###################################################] 100%
(4/4) checking available disk space                                                      [###################################################] 100%
:: Processing package changes...
(1/4) installing perl-error                                                              [###################################################] 100%
(2/4) installing perl-timedate                                                           [###################################################] 100%
(3/4) installing perl-mailtools                                                          [###################################################] 100%
(4/4) installing git                                                                     [###################################################] 100%
Optional dependencies for git
    tk: gitk and git gui
    openssh: ssh transport and crypto [installed]
    perl-libwww: git svn
    perl-term-readkey: git svn and interactive.singlekey setting
    perl-io-socket-ssl: git send-email TLS support [installed]
    perl-authen-sasl: git send-email TLS support
    perl-mediawiki-api: git mediawiki support
    perl-datetime-format-iso8601: git mediawiki support
    perl-lwp-protocol-https: git mediawiki https support
    perl-cgi: gitweb (web interface) support
    python: git svn & git p4 [installed]
    subversion: git svn
    org.freedesktop.secrets: keyring credential helper
    libsecret: libsecret credential helper [installed]
:: Running post-transaction hooks...
(1/4) Creating system user accounts...
Creating group 'git' with GID 961.
Creating user 'git' (git daemon user) with UID 961 and GID 961.
(2/4) Reloading system manager configuration...
(3/4) Arming ConditionNeedsUpdate...
(4/4) Warn about old perl modules
Cloning into 'rtl8812au'...
remote: Enumerating objects: 11222, done.
remote: Counting objects: 100% (1116/1116), done.
remote: Compressing objects: 100% (675/675), done.
remote: Total 11222 (delta 525), reused 893 (delta 422), pack-reused 10106
Receiving objects: 100% (11222/11222), 71.89 MiB | 1.99 MiB/s, done.
Resolving deltas: 100% (7493/7493), done.
Updating files: 100% (578/578), done.
Already up to date.
make ARCH=arm CROSS_COMPILE= -C /lib/modules/6.1.58-2-rpi-ARCH/build M=/root/rtl8812au  modules
warning: the compiler differs from the one used to build the kernel
  The kernel was built by: armv7l-unknown-linux-gnueabihf-gcc (GCC) 12.1.0
  You are using:           gcc (GCC) 12.1.0
  CC [M]  /root/rtl8812au/core/rtw_cmd.o
  CC [M]  /root/rtl8812au/core/rtw_security.o
  CC [M]  /root/rtl8812au/core/rtw_debug.o
  CC [M]  /root/rtl8812au/core/rtw_io.o
  CC [M]  /root/rtl8812au/core/rtw_ioctl_query.o
  CC [M]  /root/rtl8812au/core/rtw_ioctl_set.o
  CC [M]  /root/rtl8812au/core/rtw_ieee80211.o
  CC [M]  /root/rtl8812au/core/rtw_mlme.o
  CC [M]  /root/rtl8812au/core/rtw_mlme_ext.o
  CC [M]  /root/rtl8812au/core/rtw_mi.o
  CC [M]  /root/rtl8812au/core/rtw_wlan_util.o
  CC [M]  /root/rtl8812au/core/rtw_vht.o
  CC [M]  /root/rtl8812au/core/rtw_pwrctrl.o
  CC [M]  /root/rtl8812au/core/rtw_rf.o
  CC [M]  /root/rtl8812au/core/rtw_chplan.o
  CC [M]  /root/rtl8812au/core/rtw_recv.o
  CC [M]  /root/rtl8812au/core/rtw_sta_mgt.o
  CC [M]  /root/rtl8812au/core/rtw_ap.o
  CC [M]  /root/rtl8812au/core/mesh/rtw_mesh.o
  CC [M]  /root/rtl8812au/core/mesh/rtw_mesh_pathtbl.o
  CC [M]  /root/rtl8812au/core/mesh/rtw_mesh_hwmp.o
  CC [M]  /root/rtl8812au/core/rtw_xmit.o
  CC [M]  /root/rtl8812au/core/rtw_p2p.o
  CC [M]  /root/rtl8812au/core/rtw_rson.o
  CC [M]  /root/rtl8812au/core/rtw_tdls.o
  CC [M]  /root/rtl8812au/core/rtw_br_ext.o
  CC [M]  /root/rtl8812au/core/rtw_iol.o
  CC [M]  /root/rtl8812au/core/rtw_sreset.o
  CC [M]  /root/rtl8812au/core/rtw_btcoex_wifionly.o
  CC [M]  /root/rtl8812au/core/rtw_btcoex.o
  CC [M]  /root/rtl8812au/core/rtw_beamforming.o
  CC [M]  /root/rtl8812au/core/rtw_odm.o
  CC [M]  /root/rtl8812au/core/rtw_rm.o
  CC [M]  /root/rtl8812au/core/rtw_rm_fsm.o
  CC [M]  /root/rtl8812au/core/efuse/rtw_efuse.o
  CC [M]  /root/rtl8812au/os_dep/osdep_service.o
  CC [M]  /root/rtl8812au/os_dep/linux/os_intfs.o
  CC [M]  /root/rtl8812au/os_dep/linux/usb_intf.o
  CC [M]  /root/rtl8812au/os_dep/linux/usb_ops_linux.o
  CC [M]  /root/rtl8812au/os_dep/linux/ioctl_linux.o
  CC [M]  /root/rtl8812au/os_dep/linux/xmit_linux.o
  CC [M]  /root/rtl8812au/os_dep/linux/mlme_linux.o
  CC [M]  /root/rtl8812au/os_dep/linux/recv_linux.o
  CC [M]  /root/rtl8812au/os_dep/linux/ioctl_cfg80211.o
  CC [M]  /root/rtl8812au/os_dep/linux/wifi_regd.o
  CC [M]  /root/rtl8812au/os_dep/linux/rtw_android.o
  CC [M]  /root/rtl8812au/os_dep/linux/rtw_proc.o
  CC [M]  /root/rtl8812au/os_dep/linux/rtw_rhashtable.o
  CC [M]  /root/rtl8812au/os_dep/linux/ioctl_mp.o
  CC [M]  /root/rtl8812au/hal/hal_intf.o
  CC [M]  /root/rtl8812au/hal/hal_com.o
  CC [M]  /root/rtl8812au/hal/hal_com_phycfg.o
  CC [M]  /root/rtl8812au/hal/hal_phy.o
  CC [M]  /root/rtl8812au/hal/hal_dm.o
  CC [M]  /root/rtl8812au/hal/hal_dm_acs.o
  CC [M]  /root/rtl8812au/hal/hal_btcoex_wifionly.o
  CC [M]  /root/rtl8812au/hal/hal_btcoex.o
  CC [M]  /root/rtl8812au/hal/hal_mp.o
  CC [M]  /root/rtl8812au/hal/hal_mcc.o
  CC [M]  /root/rtl8812au/hal/hal_hci/hal_usb.o
  CC [M]  /root/rtl8812au/hal/led/hal_led.o
  CC [M]  /root/rtl8812au/hal/led/hal_usb_led.o
  CC [M]  /root/rtl8812au/hal/HalPwrSeqCmd.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/Hal8812PwrSeq.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/Hal8821APwrSeq.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/rtl8812a_xmit.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/rtl8812a_sreset.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/rtl8812a_hal_init.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/rtl8812a_phycfg.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/rtl8812a_rf6052.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/rtl8812a_dm.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/rtl8812a_rxdesc.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/rtl8812a_cmd.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/usb/usb_halinit.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/usb/rtl8812au_led.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/usb/rtl8812au_xmit.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/usb/rtl8812au_recv.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/usb/usb_ops_linux.o
  CC [M]  /root/rtl8812au/hal/efuse/rtl8812a/HalEfuseMask8812A_USB.o
  CC [M]  /root/rtl8812au/hal/efuse/rtl8812a/HalEfuseMask8821A_USB.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/hal8812a_fw.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/hal8821a_fw.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/Hal8814PwrSeq.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/rtl8814a_xmit.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/rtl8814a_sreset.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/rtl8814a_hal_init.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/rtl8814a_phycfg.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/rtl8814a_rf6052.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/rtl8814a_dm.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/rtl8814a_rxdesc.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/rtl8814a_cmd.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/hal8814a_fw.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/usb/usb_halinit.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/usb/rtl8814au_led.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/usb/rtl8814au_xmit.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/usb/rtl8814au_recv.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/usb/usb_ops_linux.o
  CC [M]  /root/rtl8812au/hal/efuse/rtl8814a/HalEfuseMask8814A_USB.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_debug.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_antdiv.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_soml.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_smt_ant.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_antdect.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_interface.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_phystatus.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_hwconfig.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_dig.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_pathdiv.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_rainfo.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_dynamictxpower.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_adaptivity.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_cfotracking.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_noisemonitor.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_beamforming.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_dfs.o
  CC [M]  /root/rtl8812au/hal/phydm/txbf/halcomtxbf.o
  CC [M]  /root/rtl8812au/hal/phydm/txbf/haltxbfinterface.o
  CC [M]  /root/rtl8812au/hal/phydm/txbf/phydm_hal_txbf_api.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_adc_sampling.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_ccx.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_psd.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_primary_cca.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_cck_pd.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_rssi_monitor.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_auto_dbg.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_math_lib.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_api.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_pow_train.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_lna_sat.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_pmac_tx_setting.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_mp.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/halrf.o
/root/rtl8812au/hal/phydm/halrf/halrf.c: In function ‘halrf_mode’:
/root/rtl8812au/hal/phydm/halrf/halrf.c:2394:1: warning: the frame size of 1624 bytes is larger than 1024 bytes [-Wframe-larger-than=]
 2394 | }
      | ^
  CC [M]  /root/rtl8812au/hal/phydm/halrf/halrf_debug.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/halphyrf_ce.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/halrf_powertracking_ce.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/halrf_powertracking.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/halrf_kfree.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8812a/halhwimg8812a_mac.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8812a/halhwimg8812a_bb.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8812a/halhwimg8812a_rf.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/rtl8812a/halrf_8812a_ce.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8812a/phydm_regconfig8812a.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8812a/phydm_rtl8812a.o
  CC [M]  /root/rtl8812au/hal/phydm/txbf/haltxbfjaguar.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8821a/halhwimg8821a_mac.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8821a/halhwimg8821a_bb.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8821a/halhwimg8821a_rf.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/rtl8821a/halrf_8821a_ce.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8821a/phydm_regconfig8821a.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8821a/phydm_rtl8821a.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/rtl8821a/halrf_iqk_8821a_ce.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8814a/halhwimg8814a_bb.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8814a/halhwimg8814a_mac.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8814a/halhwimg8814a_rf.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/rtl8814a/halrf_iqk_8814a.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8814a/phydm_regconfig8814a.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/rtl8814a/halrf_8814a_ce.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8814a/phydm_rtl8814a.o
  CC [M]  /root/rtl8812au/hal/phydm/txbf/haltxbf8814a.o
  CC [M]  /root/rtl8812au/platform/platform_ops.o
  CC [M]  /root/rtl8812au/core/rtw_mp.o
  LD [M]  /root/rtl8812au/88XXau.o
  MODPOST /root/rtl8812au/Module.symvers
  CC [M]  /root/rtl8812au/88XXau.mod.o
  LD [M]  /root/rtl8812au/88XXau.ko
---------------------------------------------------------------------------
Visit https://github.com/aircrack-ng/rtl8812au for support/reporting issues
or check for newer versions (branches) of these drivers.
---------------------------------------------------------------------------
install -p -m 644 88XXau.ko  /lib/modules/6.1.58-2-rpi-ARCH/kernel/drivers/net/wireless/
/sbin/depmod -a 6.1.58-2-rpi-ARCH
rAudio:~/rtl8812au  #

sadays · 5/12/23

I ordered 4gb rpi5

79 usd in Turkey distributor

i am waitinq lms-raudio for rpi5

ibraino · 5/12/23

Với pi 2 trước e dùng airport express (đã mod nguồn) bắt wifi rồi cắm vô cổng lan cho pi 2. Mà chưa test thử tốc độ ra sao.

quatmo · 5/12/23

linh0983 đã viết:

Làm thẻ mới pass cùng lúc 11 dòng : RTL8812AU cài driver thàng công nhưng rAudio 32bit vẫn chưa thấy CF-917 bác Lâm ạ ( mò mẫm cho biết driver chú này khó chịu đến đâu ui ? ) .

sudo pacman -Syu (n)
sudo pacman -S linux-rpi-headers
sudo mv -f /usr/lib/modules/6.1.64-2-rpi-ARCH/build /usr/lib/modules/6.1.58-2-rpi-ARCH/
sudo pacman -S base-devel
sudo pacman -S bc
sudo pacman -S git
git clone https://github.com/aircrack-ng/rtl8812au.git
cd rtl8812au
git pull
make
sudo make install

Mã:

   r A u d i o


rAudio:~  #  sudo pacman -Syu
sudo pacman -S linux-rpi-headers
sudo mv -f /usr/lib/modules/6.1.64-2-rpi-ARCH/build /usr/lib/modules/6.1.58-2-rpi-ARCH/
sudo pacman -S base-devel
sudo pacman -S bc
sudo pacman -S git
git clone https://github.com/aircrack-ng/rtl8812au.git
cd rtl8812au
git pull
make
sudo make install
:: Synchronizing package databases...
 +R is up to date
 core is up to date
 extra                                                         8.9 MiB   621 KiB/s 00:15 [###################################################] 100%
 alarm is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for conflicting packages...

Packages (102) archlinux-keyring-20231130-1  avahi-1:0.8+r189+g35bb1ba-1  bash-5.2.021-1  blas-3.12.0-2  c-ares-1.23.0-1
               ca-certificates-mozilla-3.95-1  cblas-3.12.0-2  dhcpcd-10.0.5-1  dialog-1:1.3_20231002-1  ffmpeg-2:6.1-1  firefox-120.0.1-1
               gawk-5.3.0-1  gettext-0.22.4-1  glib2-2.78.1-1  gnupg-2.4.3-2  gnutls-3.8.2-1  gpgme-1.23.2-1  gssproxy-0.9.2-1
               gtk-update-icon-cache-1:4.12.4-1  harfbuzz-8.3.0-1  hwdata-0.376-1  iana-etc-20231117-1  imagemagick-7.1.1.22-1  iproute2-6.6.0-2
               iptables-1:1.8.10-1  krb5-1.20.1-2  lapack-3.12.0-2  libass-0.17.1-2  libcap-2.69-3  libcloudproviders-0.3.5-1  libdrm-2.4.118-1
               libelf-0.190-1  libgcrypt-1.10.3-1  libjpeg-turbo-3.0.1-1  libksba-1.6.5-1  libnghttp2-1.58.0-1  libnpupnp-5.1.2-1  libnsl-2.0.1-1
               libp11-kit-0.25.3-1  libpipewire-1:1.0.0-2  libpulse-16.1-7  libsndfile-1.2.2-2  libsoup3-3.4.4-1  libsysprof-capture-45.1-1
               libtiff-4.6.0-2  libunibreak-5.1-1  libunwind-1.7.2-1  libupnpp-0.24.1-1  liburing-2.5-1  libuv-1.47.0-1  libwacom-2.9.0-2
               libwbclient-4.19.3-1  libwebsockets-4.3.3-1  libxml2-2.12.1-1  linux-firmware-20231110.74158e7a-1
               linux-firmware-whence-20231110.74158e7a-1  linux-rpi-6.1.64-2  mkinitcpio-37.1-1  mpd-0.23.14-2  nfs-utils-2.6.4-1
               nfsidmap-2.6.4-1  nftables-1:1.0.9-1  nginx-mainline-1.25.3-1  nss-3.95-1  openssl-3.1.4-1  p11-kit-0.25.3-1  pcsclite-2.0.1-1
               php-8.2.13-1  php-fpm-8.2.13-1  python-3.11.6-1  python-attrs-23.1.0-1  python-charset-normalizer-3.3.2-1
               python-jsonschema-4.20.0-1  python-jsonschema-specifications-2023.11.2-1  python-numpy-1.26.2-1  python-referencing-0.31.1-1
               python-upnpp-0.24.0-1  python-urllib3-1.26.18-1  qt5-base-5.15.11+kde+r147-1  raspberrypi-bootloader-20231129-1
               raspberrypi-utils-20231130-1  readline-8.2.007-1  samba-4.19.3-1  sdl2-2.28.5-1  shadow-4.14.2-1  shairport-sync-4.3.2-1
               shared-mime-info-2.4-1  smbclient-4.19.3-1  sqlite-3.44.2-2  sudo-1.9.15.p2-1  systemd-254.6-2  systemd-libs-254.6-2
               systemd-sysvcompat-254.6-2  upmpdcli-1.8.6-1  util-linux-2.39.2-2  util-linux-libs-2.39.2-2  vulkan-icd-loader-1.3.269-1
               xdg-utils-1.2.0r17+g21fb316-1  xorg-server-21.1.9-1  xorg-server-common-21.1.9-1  xz-5.4.5-1  zlib-1:1.3-2

Total Download Size:    313.56 MiB
Total Installed Size:  1338.16 MiB
Net Upgrade Size:        46.98 MiB

:: Proceed with installation? [Y/n] n
resolving dependencies...
looking for conflicting packages...

Packages (1) linux-rpi-headers-6.1.64-2

Total Download Size:    9.89 MiB
Total Installed Size:  52.54 MiB

:: Proceed with installation? [Y/n] y
:: Retrieving packages...
 linux-rpi-headers-6.1.64-2-armv7h                                         9.9 MiB  1491 KiB/s 00:07 [#############################################
(1/1) checking keys in keyring                                                                       [#############################################
(1/1) checking package integrity                                                                     [#############################################
(1/1) loading package files                                                                          [#############################################
(1/1) checking for file conflicts                                                                    [#############################################
(1/1) checking available disk space                                                                  [#############################################
:: Processing package changes...
(1/1) installing linux-rpi-headers                                                                   [#############################################
:: Running post-transaction hooks...
(1/2) Arming ConditionNeedsUpdate...
(2/2) Updating module dependencies...
resolving dependencies...
looking for conflicting packages...

Packages (18) autoconf-2.71-4  automake-1.16.5-2  bison-3.8.2-6  debugedit-5.0-5  fakeroot-1.32.2-1  flex-2.6.4-5  gc-8.2.4-1  gcc-12.1.0-2.1  grof
              guile-3.0.9-1  libisl-0.26-1  libmpc-1.3.1-1  m4-1.4.19-3  make-4.4.1-2  patch-2.7.6-10  pkgconf-2.0.3-1  texinfo-7.1-2  base-devel-1

Total Download Size:    44.00 MiB
Total Installed Size:  208.53 MiB

:: Proceed with installation? [Y/n] y
:: Retrieving packages...
 gcc-12.1.0-2.1-armv7h                                                    28.8 MiB   487 KiB/s 01:01 [#############################################
 guile-3.0.9-1-armv7h                                                      6.9 MiB   377 KiB/s 00:00 [############################################# guile-3.0.9-1-armv7h                                          7.0 MiB   276 KiB/s 00:26 [###################################################] 100% groff-1.23.0-5-armv7h                                         2.0 MiB   568 KiB/s 00:04 [###################################################] 100%
 texinfo-7.1-2-armv7h                                       1601.4 KiB   330 KiB/s 00:05 [###################################################] 100%
 libisl-0.26-1-armv7h                                       1186.2 KiB   306 KiB/s 00:04 [###################################################] 100%
 bison-3.8.2-6-armv7h                                        716.8 KiB   276 KiB/s 00:03 [###################################################] 100%
 autoconf-2.71-4-any                                         638.6 KiB   246 KiB/s 00:03 [###################################################] 100%
 automake-1.16.5-2-any                                       606.5 KiB   237 KiB/s 00:03 [###################################################] 100%
 make-4.4.1-2-armv7h                                         474.2 KiB   256 KiB/s 00:02 [###################################################] 100%
 flex-2.6.4-5-armv7h                                         281.3 KiB   180 KiB/s 00:02 [###################################################] 100%
 m4-1.4.19-3-armv7h                                          228.0 KiB  73.8 KiB/s 00:03 [###################################################] 100%
 gc-8.2.4-1-armv7h                                           214.4 KiB  83.1 KiB/s 00:03 [###################################################] 100%
 patch-2.7.6-10-armv7h                                        92.9 KiB  90.2 KiB/s 00:01 [###################################################] 100%
 fakeroot-1.32.2-1-armv7h                                     73.4 KiB  96.6 KiB/s 00:01 [###################################################] 100%
 libmpc-1.3.1-1-armv7h                                        73.0 KiB  57.5 KiB/s 00:01 [###################################################] 100%
 pkgconf-2.0.3-1-armv7h                                       53.9 KiB  53.4 KiB/s 00:01 [###################################################] 100%
 debugedit-5.0-5-armv7h                                       40.7 KiB  40.3 KiB/s 00:01 [###################################################] 100%
 base-devel-1-1-any                                            2.0 KiB  3.98 KiB/s 00:01 [###################################################] 100%
 Total (18/18)                                                44.0 MiB   357 KiB/s 02:06 [###################################################] 100%
(18/18) checking keys in keyring                                                         [###################################################] 100%
(18/18) checking package integrity                                                       [###################################################] 100%
(18/18) loading package files                                                            [###################################################] 100%
(18/18) checking for file conflicts                                                      [###################################################] 100%
(18/18) checking available disk space                                                    [###################################################] 100%
:: Processing package changes...
( 1/18) installing m4                                                                    [###################################################] 100%
( 2/18) installing autoconf                                                              [###################################################] 100%
( 3/18) installing automake                                                              [###################################################] 100%
( 4/18) installing bison                                                                 [###################################################] 100%
( 5/18) installing debugedit                                                             [###################################################] 100%
( 6/18) installing fakeroot                                                              [###################################################] 100%
( 7/18) installing flex                                                                  [###################################################] 100%
( 8/18) installing libmpc                                                                [###################################################] 100%
( 9/18) installing libisl                                                                [###################################################] 100%
(10/18) installing gcc                                                                   [###################################################] 100%
(11/18) installing groff                                                                 [###################################################] 100%
Optional dependencies for groff
    netpbm: for use together with man -H command interaction in browsers
    psutils: for use together with man -H command interaction in browsers
    libxaw: for gxditview
    perl-file-homedir: for use with glilypond
(12/18) installing gc                                                                    [###################################################] 100%
(13/18) installing guile                                                                 [###################################################] 100%
(14/18) installing make                                                                  [###################################################] 100%
(15/18) installing patch                                                                 [###################################################] 100%
Optional dependencies for patch
    ed: for patch -e functionality
(16/18) installing pkgconf                                                               [###################################################] 100%
(17/18) installing texinfo                                                               [###################################################] 100%
Optional dependencies for texinfo
    perl-archive-zip: EPUB file output via texi2any
(18/18) installing base-devel                                                            [###################################################] 100%
:: Running post-transaction hooks...
(1/2) Arming ConditionNeedsUpdate...
(2/2) Updating the info directory file...
resolving dependencies...
looking for conflicting packages...

Packages (1) bc-1.07.1-4

Total Download Size:   0.08 MiB
Total Installed Size:  0.15 MiB

:: Proceed with installation? [Y/n] y
:: Retrieving packages...
 bc-1.07.1-4-armv7h                                           78.4 KiB  49.6 KiB/s 00:02 [###################################################] 100%
(1/1) checking keys in keyring                                                           [###################################################] 100%
(1/1) checking package integrity                                                         [###################################################] 100%
(1/1) loading package files                                                              [###################################################] 100%
(1/1) checking for file conflicts                                                        [###################################################] 100%
(1/1) checking available disk space                                                      [###################################################] 100%
:: Processing package changes...
(1/1) installing bc                                                                      [###################################################] 100%
:: Running post-transaction hooks...
(1/2) Arming ConditionNeedsUpdate...
(2/2) Updating the info directory file...
resolving dependencies...
looking for conflicting packages...

Packages (4) perl-error-0.17029-5  perl-mailtools-2.21-7  perl-timedate-2.33-5  git-2.43.0-1

Total Download Size:    6.09 MiB
Total Installed Size:  37.72 MiB

:: Proceed with installation? [Y/n] y
:: Retrieving packages...
 git-2.43.0-1-armv7h                                           6.0 MiB   298 KiB/s 00:21 [###################################################] 100%
 perl-mailtools-2.21-7-any                                    58.5 KiB  46.1 KiB/s 00:01 [###################################################] 100%
 perl-timedate-2.33-5-any                                     32.9 KiB  43.3 KiB/s 00:01 [###################################################] 100%
 perl-error-0.17029-5-any                                     21.0 KiB  40.4 KiB/s 00:01 [###################################################] 100%
 Total (4/4)                                                   6.1 MiB   258 KiB/s 00:24 [###################################################] 100%
(4/4) checking keys in keyring                                                           [###################################################] 100%
(4/4) checking package integrity                                                         [###################################################] 100%
(4/4) loading package files                                                              [###################################################] 100%
(4/4) checking for file conflicts                                                        [###################################################] 100%
(4/4) checking available disk space                                                      [###################################################] 100%
:: Processing package changes...
(1/4) installing perl-error                                                              [###################################################] 100%
(2/4) installing perl-timedate                                                           [###################################################] 100%
(3/4) installing perl-mailtools                                                          [###################################################] 100%
(4/4) installing git                                                                     [###################################################] 100%
Optional dependencies for git
    tk: gitk and git gui
    openssh: ssh transport and crypto [installed]
    perl-libwww: git svn
    perl-term-readkey: git svn and interactive.singlekey setting
    perl-io-socket-ssl: git send-email TLS support [installed]
    perl-authen-sasl: git send-email TLS support
    perl-mediawiki-api: git mediawiki support
    perl-datetime-format-iso8601: git mediawiki support
    perl-lwp-protocol-https: git mediawiki https support
    perl-cgi: gitweb (web interface) support
    python: git svn & git p4 [installed]
    subversion: git svn
    org.freedesktop.secrets: keyring credential helper
    libsecret: libsecret credential helper [installed]
:: Running post-transaction hooks...
(1/4) Creating system user accounts...
Creating group 'git' with GID 961.
Creating user 'git' (git daemon user) with UID 961 and GID 961.
(2/4) Reloading system manager configuration...
(3/4) Arming ConditionNeedsUpdate...
(4/4) Warn about old perl modules
Cloning into 'rtl8812au'...
remote: Enumerating objects: 11222, done.
remote: Counting objects: 100% (1116/1116), done.
remote: Compressing objects: 100% (675/675), done.
remote: Total 11222 (delta 525), reused 893 (delta 422), pack-reused 10106
Receiving objects: 100% (11222/11222), 71.89 MiB | 1.99 MiB/s, done.
Resolving deltas: 100% (7493/7493), done.
Updating files: 100% (578/578), done.
Already up to date.
make ARCH=arm CROSS_COMPILE= -C /lib/modules/6.1.58-2-rpi-ARCH/build M=/root/rtl8812au  modules
warning: the compiler differs from the one used to build the kernel
  The kernel was built by: armv7l-unknown-linux-gnueabihf-gcc (GCC) 12.1.0
  You are using:           gcc (GCC) 12.1.0
  CC [M]  /root/rtl8812au/core/rtw_cmd.o
  CC [M]  /root/rtl8812au/core/rtw_security.o
  CC [M]  /root/rtl8812au/core/rtw_debug.o
  CC [M]  /root/rtl8812au/core/rtw_io.o
  CC [M]  /root/rtl8812au/core/rtw_ioctl_query.o
  CC [M]  /root/rtl8812au/core/rtw_ioctl_set.o
  CC [M]  /root/rtl8812au/core/rtw_ieee80211.o
  CC [M]  /root/rtl8812au/core/rtw_mlme.o
  CC [M]  /root/rtl8812au/core/rtw_mlme_ext.o
  CC [M]  /root/rtl8812au/core/rtw_mi.o
  CC [M]  /root/rtl8812au/core/rtw_wlan_util.o
  CC [M]  /root/rtl8812au/core/rtw_vht.o
  CC [M]  /root/rtl8812au/core/rtw_pwrctrl.o
  CC [M]  /root/rtl8812au/core/rtw_rf.o
  CC [M]  /root/rtl8812au/core/rtw_chplan.o
  CC [M]  /root/rtl8812au/core/rtw_recv.o
  CC [M]  /root/rtl8812au/core/rtw_sta_mgt.o
  CC [M]  /root/rtl8812au/core/rtw_ap.o
  CC [M]  /root/rtl8812au/core/mesh/rtw_mesh.o
  CC [M]  /root/rtl8812au/core/mesh/rtw_mesh_pathtbl.o
  CC [M]  /root/rtl8812au/core/mesh/rtw_mesh_hwmp.o
  CC [M]  /root/rtl8812au/core/rtw_xmit.o
  CC [M]  /root/rtl8812au/core/rtw_p2p.o
  CC [M]  /root/rtl8812au/core/rtw_rson.o
  CC [M]  /root/rtl8812au/core/rtw_tdls.o
  CC [M]  /root/rtl8812au/core/rtw_br_ext.o
  CC [M]  /root/rtl8812au/core/rtw_iol.o
  CC [M]  /root/rtl8812au/core/rtw_sreset.o
  CC [M]  /root/rtl8812au/core/rtw_btcoex_wifionly.o
  CC [M]  /root/rtl8812au/core/rtw_btcoex.o
  CC [M]  /root/rtl8812au/core/rtw_beamforming.o
  CC [M]  /root/rtl8812au/core/rtw_odm.o
  CC [M]  /root/rtl8812au/core/rtw_rm.o
  CC [M]  /root/rtl8812au/core/rtw_rm_fsm.o
  CC [M]  /root/rtl8812au/core/efuse/rtw_efuse.o
  CC [M]  /root/rtl8812au/os_dep/osdep_service.o
  CC [M]  /root/rtl8812au/os_dep/linux/os_intfs.o
  CC [M]  /root/rtl8812au/os_dep/linux/usb_intf.o
  CC [M]  /root/rtl8812au/os_dep/linux/usb_ops_linux.o
  CC [M]  /root/rtl8812au/os_dep/linux/ioctl_linux.o
  CC [M]  /root/rtl8812au/os_dep/linux/xmit_linux.o
  CC [M]  /root/rtl8812au/os_dep/linux/mlme_linux.o
  CC [M]  /root/rtl8812au/os_dep/linux/recv_linux.o
  CC [M]  /root/rtl8812au/os_dep/linux/ioctl_cfg80211.o
  CC [M]  /root/rtl8812au/os_dep/linux/wifi_regd.o
  CC [M]  /root/rtl8812au/os_dep/linux/rtw_android.o
  CC [M]  /root/rtl8812au/os_dep/linux/rtw_proc.o
  CC [M]  /root/rtl8812au/os_dep/linux/rtw_rhashtable.o
  CC [M]  /root/rtl8812au/os_dep/linux/ioctl_mp.o
  CC [M]  /root/rtl8812au/hal/hal_intf.o
  CC [M]  /root/rtl8812au/hal/hal_com.o
  CC [M]  /root/rtl8812au/hal/hal_com_phycfg.o
  CC [M]  /root/rtl8812au/hal/hal_phy.o
  CC [M]  /root/rtl8812au/hal/hal_dm.o
  CC [M]  /root/rtl8812au/hal/hal_dm_acs.o
  CC [M]  /root/rtl8812au/hal/hal_btcoex_wifionly.o
  CC [M]  /root/rtl8812au/hal/hal_btcoex.o
  CC [M]  /root/rtl8812au/hal/hal_mp.o
  CC [M]  /root/rtl8812au/hal/hal_mcc.o
  CC [M]  /root/rtl8812au/hal/hal_hci/hal_usb.o
  CC [M]  /root/rtl8812au/hal/led/hal_led.o
  CC [M]  /root/rtl8812au/hal/led/hal_usb_led.o
  CC [M]  /root/rtl8812au/hal/HalPwrSeqCmd.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/Hal8812PwrSeq.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/Hal8821APwrSeq.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/rtl8812a_xmit.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/rtl8812a_sreset.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/rtl8812a_hal_init.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/rtl8812a_phycfg.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/rtl8812a_rf6052.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/rtl8812a_dm.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/rtl8812a_rxdesc.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/rtl8812a_cmd.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/usb/usb_halinit.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/usb/rtl8812au_led.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/usb/rtl8812au_xmit.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/usb/rtl8812au_recv.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/usb/usb_ops_linux.o
  CC [M]  /root/rtl8812au/hal/efuse/rtl8812a/HalEfuseMask8812A_USB.o
  CC [M]  /root/rtl8812au/hal/efuse/rtl8812a/HalEfuseMask8821A_USB.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/hal8812a_fw.o
  CC [M]  /root/rtl8812au/hal/rtl8812a/hal8821a_fw.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/Hal8814PwrSeq.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/rtl8814a_xmit.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/rtl8814a_sreset.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/rtl8814a_hal_init.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/rtl8814a_phycfg.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/rtl8814a_rf6052.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/rtl8814a_dm.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/rtl8814a_rxdesc.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/rtl8814a_cmd.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/hal8814a_fw.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/usb/usb_halinit.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/usb/rtl8814au_led.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/usb/rtl8814au_xmit.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/usb/rtl8814au_recv.o
  CC [M]  /root/rtl8812au/hal/rtl8814a/usb/usb_ops_linux.o
  CC [M]  /root/rtl8812au/hal/efuse/rtl8814a/HalEfuseMask8814A_USB.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_debug.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_antdiv.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_soml.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_smt_ant.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_antdect.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_interface.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_phystatus.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_hwconfig.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_dig.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_pathdiv.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_rainfo.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_dynamictxpower.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_adaptivity.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_cfotracking.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_noisemonitor.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_beamforming.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_dfs.o
  CC [M]  /root/rtl8812au/hal/phydm/txbf/halcomtxbf.o
  CC [M]  /root/rtl8812au/hal/phydm/txbf/haltxbfinterface.o
  CC [M]  /root/rtl8812au/hal/phydm/txbf/phydm_hal_txbf_api.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_adc_sampling.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_ccx.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_psd.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_primary_cca.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_cck_pd.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_rssi_monitor.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_auto_dbg.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_math_lib.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_api.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_pow_train.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_lna_sat.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_pmac_tx_setting.o
  CC [M]  /root/rtl8812au/hal/phydm/phydm_mp.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/halrf.o
/root/rtl8812au/hal/phydm/halrf/halrf.c: In function ‘halrf_mode’:
/root/rtl8812au/hal/phydm/halrf/halrf.c:2394:1: warning: the frame size of 1624 bytes is larger than 1024 bytes [-Wframe-larger-than=]
 2394 | }
      | ^
  CC [M]  /root/rtl8812au/hal/phydm/halrf/halrf_debug.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/halphyrf_ce.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/halrf_powertracking_ce.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/halrf_powertracking.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/halrf_kfree.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8812a/halhwimg8812a_mac.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8812a/halhwimg8812a_bb.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8812a/halhwimg8812a_rf.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/rtl8812a/halrf_8812a_ce.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8812a/phydm_regconfig8812a.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8812a/phydm_rtl8812a.o
  CC [M]  /root/rtl8812au/hal/phydm/txbf/haltxbfjaguar.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8821a/halhwimg8821a_mac.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8821a/halhwimg8821a_bb.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8821a/halhwimg8821a_rf.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/rtl8821a/halrf_8821a_ce.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8821a/phydm_regconfig8821a.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8821a/phydm_rtl8821a.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/rtl8821a/halrf_iqk_8821a_ce.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8814a/halhwimg8814a_bb.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8814a/halhwimg8814a_mac.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8814a/halhwimg8814a_rf.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/rtl8814a/halrf_iqk_8814a.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8814a/phydm_regconfig8814a.o
  CC [M]  /root/rtl8812au/hal/phydm/halrf/rtl8814a/halrf_8814a_ce.o
  CC [M]  /root/rtl8812au/hal/phydm/rtl8814a/phydm_rtl8814a.o
  CC [M]  /root/rtl8812au/hal/phydm/txbf/haltxbf8814a.o
  CC [M]  /root/rtl8812au/platform/platform_ops.o
  CC [M]  /root/rtl8812au/core/rtw_mp.o
  LD [M]  /root/rtl8812au/88XXau.o
  MODPOST /root/rtl8812au/Module.symvers
  CC [M]  /root/rtl8812au/88XXau.mod.o
  LD [M]  /root/rtl8812au/88XXau.ko
---------------------------------------------------------------------------
Visit https://github.com/aircrack-ng/rtl8812au for support/reporting issues
or check for newer versions (branches) of these drivers.
---------------------------------------------------------------------------
install -p -m 644 88XXau.ko  /lib/modules/6.1.58-2-rpi-ARCH/kernel/drivers/net/wireless/
/sbin/depmod -a 6.1.58-2-rpi-ARCH
rAudio:~/rtl8812au  #

Anh thử chạy thêm dòng này xem có hiện gì và reboot lại

Trang tài liệu thông tin về USB wifi rất hay: https://github.com/morrownr/USB-WiFi/

sudo modprobe 88XXau

--------------------------
Lời khuyên của bác morrownr dành cho việc mua và sử dụng USB Wifi trên Linux: https://github.com/morrownr/USB-WiF...Fi_Adapter_out-of-kernel_drivers_for_Linux.md

Trích dẫn của tác giả:

Lời khuyên của tôi, đối với những người dùng Linux cần mua bộ điều hợp mới, là hãy ưu tiên các bộ điều hợp dựa trên chipset Mediatek vì trình điều khiển Mediatek dựa trên Tiêu chuẩn Không dây Linux (mac80211) và được duy trì trong kernel. Điều này làm cho các bộ điều hợp dựa trên Mediatek trở nên ít rắc rối hơn về lâu dài.
--------

Nếu bạn không thể tìm thấy bộ điều hợp dựa trên chipset Mediatek thì tôi khuyên bạn nên sử dụng bộ điều hợp dựa trên chipset sau: 8812bu. Hiện tại, tôi khuyên bạn nên TRÁNH bộ điều hợp dựa trên chipset Realtek 8814au, 8832au và 8852au vì trình điều khiển không tốt và tôi cũng khuyên bạn TRÁNH bộ điều hợp đa trạng thái và đa chức năng (wifi và bt).

linh0983 · 6/12/23

quatmo đã viết:
Anh thử chạy thêm dòng này xem có hiện gì và reboot lại

Trang tài liệu thông tin về USB wifi rất hay: https://github.com/morrownr/USB-WiFi/

sudo modprobe 88XXau

--------------------------
Lời khuyên của bác morrownr dành cho việc mua và sử dụng USB Wifi trên Linux: https://github.com/morrownr/USB-WiF...Fi_Adapter_out-of-kernel_drivers_for_Linux.md

Trích dẫn của tác giả:

Lời khuyên của tôi, đối với những người dùng Linux cần mua bộ điều hợp mới, là hãy ưu tiên các bộ điều hợp dựa trên chipset Mediatek vì trình điều khiển Mediatek dựa trên Tiêu chuẩn Không dây Linux (mac80211) và được duy trì trong kernel. Điều này làm cho các bộ điều hợp dựa trên Mediatek trở nên ít rắc rối hơn về lâu dài.
--------

Nếu bạn không thể tìm thấy bộ điều hợp dựa trên chipset Mediatek thì tôi khuyên bạn nên sử dụng bộ điều hợp dựa trên chipset sau: 8812bu. Hiện tại, tôi khuyên bạn nên TRÁNH bộ điều hợp dựa trên chipset Realtek 8814au, 8832au và 8852au vì trình điều khiển không tốt và tôi cũng khuyên bạn TRÁNH bộ điều hợp đa trạng thái và đa chức năng (wifi và bt).

Lời khuyên rất hay xem khi về chú COMFAST CF-812ACv2 (RTL8812BU) có được ko ?

Sáng nay tôi đi lấy cục biến thế đây ui . . .

quatmo · 6/12/23

linh0983 đã viết:
Lời khuyên rất hay xem khi về chú COMFAST CF-812ACv2 (RTL8812BU) có được ko ?

Sáng nay tôi đi lấy cục biến thế đây ui . . .

Hôm nào em ghé mượn USB wifi 8814Au của anh về thử.

TuanQuynhAudio · 6/12/23

Trên Shoppee có con wifi COMFAST CF-812AC và CF-924AC, đều dùng chip RTL8812BU. Các anh ship ở đây cho nhanh ạ.
Shopee:
- CF-812AC
- CF-924AC

https://shopee.vn/B%E1%BB%99-thu-wifi-USB-5G-11AC-1300-Mbps-Comfast-812ac-usb3.0-RTL8812BU-dual-band-Cho-Pc-i.1032369025.20292197237

https://shopee.vn/B%E1%BB%99-thu-WiFi-COMFAST-1300Mbps-USB3.0-B%C3%AAn-ngo%C3%A0i-2-%C4%82ng-ten-B%C4%83ng-t%E1%BA%A7n-k%C3%A9p-11AC-MU-MIMO-for-Win10-11-CF-924AC-i.1032369025.20490741933

linh0983 · 6/12/23

Nó như vầy bác Nam ạ .

linh0983 · 6/12/23

quatmo đã viết:
Hôm nào em ghé mượn USB wifi 8814Au của anh về thử.

Vâng ạ .

linh0983 · 6/12/23

TuanQuynhAudio đã viết:
Trên Shoppee có con wifi COMFAST CF-812AC và CF-924AC, đều dùng chip RTL8812BU. Các anh ship ở đây cho nhanh ạ.
Shopee:
- CF-812AC
- CF-924AC

https://shopee.vn/B%E1%BB%99-thu-wifi-USB-5G-11AC-1300-Mbps-Comfast-812ac-usb3.0-RTL8812BU-dual-band-Cho-Pc-i.1032369025.20292197237

https://shopee.vn/B%E1%BB%99-thu-WiFi-COMFAST-1300Mbps-USB3.0-B%C3%AAn-ngo%C3%A0i-2-%C4%82ng-ten-B%C4%83ng-t%E1%BA%A7n-k%C3%A9p-11AC-MU-MIMO-for-Win10-11-CF-924AC-i.1032369025.20490741933

Chú COMFAST CF-812AC hết hàng rồi bác Quỳnh ạ .

nqn_vnn · 6/12/23

Em lỡ xoá file raudio cho pi2 pi3 của Bác quatmo, kiếm hoài ko thấy link cũ đâu... Bác nào share lại link em down với ạ. Thanks các Bác

quatmo · 6/12/23

nqn_vnn đã viết:
Em lỡ xoá file raudio cho pi2 pi3 của Bác quatmo, kiếm hoài ko thấy link cũ đâu... Bác nào share lại link em down với ạ. Thanks các Bác

Ở đây bác.

https://www.hdvietnam.me/threads/raspberry-pi-rune-audio-mot-trai-nghiem-nghe-nhac-moi.1174389/page-1333#post-10877269

nqn_vnn · 6/12/23

quatmo đã viết:
rAudioLMS Pi 2-3 đã xong.
Sử dụng thuận tiện chuyển qua lại rAudio-LMS.

Nếu đang là rAudio, bấm vào logo góc trái sẽ mở ra LMS.

Đang là LMS bấm vào menu phải trên để truy cập rAudio hoặc truy cập Nas nhà mở nhạc đến rAudio. Bấm mũi tên back trái là quay lai LMS ngay.

Đang ghi IMG/Upload, khi nào xong mình add link vào đây.
Bản này cho Pi2, Pi3 nên mình build LMS 32bit trong ArchLinux, để cho nhẹ máy.

Cập nhật link:

https://drive.google.com/file/d/1I8M02A9sm-7B6V3iSNzJSZ_r2Ufb7f5Y/view?usp=sharing

link bị xoá, Bác reup giúp em với ạ

. Thanks Bác

sadays · 6/12/23

volumio 3.569 version supports rpi5

Let me check the sound quality of my local files first.

toi511 · 6/12/23

Anh @quatmo làm sao set ip tĩnh cho raudio anh. Ông anh xài không rành mà nó cứ đổi ip liên tục ông không vô được. Thanks anh

Raspberry Pi + Rune Audio ::: Một trải nghiệm nghe nhạc mới

Well-Known Member

Well-Known Member

COMFAST CF-972AX Chipset: RTL8832CU . ​

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Member

Well-Known Member

So sánh TV Sony X90L và Samsung Q80C - Năm nay TV Full Array LED nào vượt trội?

COMFAST CF-972AX Chipset: RTL8832CU .