Có một bác khoai tây trên
http://mybookworld.wikidot.com/foru...s-of-optware-feed-for-white-light#post-733260 viết cái script tự khởi động lại TRANS khi transmision-daemon chết, em copy nguyên văn dưới đây, các bác cao thủ linux trên này thử giúp xem có chạy trên LS được k0? cái box của em đang kéo Ký Sự Mekong nên k0 dám làm chuột bạch
Re: Old versions of optware feed for White Light
shermanv 26 Mar 2010, 01:14 +0700
in discussion Forum / Optware » Old versions of optware feed for White Light
Here you are
It uses transmission-remote to check whether transmission-daemon is alive. If it is not - then it restarts it.
The script is suited for cron and all output goes to /var/log/messages. So if you will run it manually you won't see anything.
If do really want to see then just remove everything after the last "}"
PROGNAME=`echo $0 | sed -e "s,^.*/,,"`
TRANSR="/opt/bin/transmission-remote"
TRANSRCMD="—list"
TRANS="/opt/etc/init.d/S90Transmission"
START="start"
STOP="stop"
[ -x $TRANSR ] || exit 1
[ -x $TRANS ] || exit 1
printmsg ()
{
echo $1
}
{
printmsg "Querying Transmission…"
$TRANSR $TRANSRCMD
while [ "$?" != "0" ]
do
printmsg "Seems Transmission is dead. Restarting…"
$TRANS $STOP
sleep 5
$TRANS $START
sleep 5
$TRANSR $TRANSRCMD
done
printmsg "Transmission is alive. Keep watching…"
} 2>&1 | logger -p daemon.info -t $PROGNAME
I don't need it anymore as after reinstalling 1.91 everything is fine and I don't need to look after it anymore
BR,
Valery
